Hotpoint CH60GTCF Oven Timer Operation, Timer Function Buttons, Auto Cooking Programme, Clockface

Page 16

OVEN TIMER OPERATION

A

0 . 0 0

T

U

 

O

0 . 0 0

0 . 0 0

U

A 0 . 0 0

T

O

CLOCKFACE

The timer incorporates a 24 hour clock.

Ensure the correct time of day is always set, before using your cooker.

SYMBOLS

A 'bell' symbol will light up when you select a Minute Minder Period and will remain lit for the period set.

At the end of the Minute Minder Period, the timer will emit an audible tone and the 'bell' symbol will disappear.

The 'cookpot' symbol will light up either:-

-When the timer is in manual mode, or

-During the actual Cook Period.

'AUTO' will light up:-

-When the timer is first turned on it will flash. It will go out when a time of day is set or when the timer is set to manual.

The 'AUTO' symbol will flash at the end of an Auto Cooking programme to indicate that the programme has finished.

(When the 'AUTO' symbol is flashing, to return the oven to Manual operation, turn the oven controls off, and press the "Manual" button - The 'AUTO' symbol will go out).

TIMER FUNCTION BUTTONS

Minute Minder Button

Here you can set a time period of up to 23 hours 59 minutes, that will count down. When it reaches zero, the timer will emit an audible tone.

For Example: If you set 20 minutes, the audible tone will occur 20 minutes later.

AUTO COOKING PROGRAMME

Cook Period Button

Cook Period is the actual length of time for which, the timer will switch the oven(s) on as part of an "Auto Cooking" programme. (e.g. If you set 2 hours, the food will be cooked for 2 hours).

End Time Button

The time of day at which you want an "Auto Cooking" programme to end.

For Example: If you set a "Cook Period" for 2 hours, and "End Time" of 11:00. The timer will switch the oven(s) on at 9:00 and turn the oven(s) off at 11:00. You will hear a audible tone at 11:00, to indicate that the Auto Cooking Programme has finished.

Notes:

-When setting an Auto Cooking programme you will need to set the oven control(s) to the required temperature(s) when you set the timer.

-If an Auto Cooking programme has been set the oven(s) will only operate during the pre-programmed time.

Manual Button

Needs to be pressed to cancel an Auto Cooking programme and return the oven(s) to Manual operation.

"+" and "-" Buttons

Used to adjust the various timer function settings.

16PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Image 16
Contents Use and Installation Instructions Contents Introduction For Your Safety AlwaysNever Installation Instructions GAS Safety Installation & USE RegulationsModel Numbers CH60GTCF & CH60GTXF LocationTechnical Data Space for Fixing Cooker HoodsLevelling Unpacking the CookerConversion for USE on Butane G30 or Propane G31 Connecting to GAS Supply Stability ChainIf the Fitted Plug is Removed Electrical ConnectionIf a Moulded Plug is Fitted Installation and Operational Checks Features Control Panel Control Knobs for the gas burnersAutomatic Cooking Guidance on Automatic CookingOven Timer Operation Timer Function ButtonsSymbols Auto Cooking ProgrammeSetting the Time of DAY Setting the Minute MinderAuto Cooking Programmes OT1Oven Timer Operation Other Notes on Timer Operation Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireGrill To USE the Grill Remove Heat Shield From Shelf When Grilling for MaximumRelighting the Burner Main Oven To USE the Main OvenCold Start Cooking Roasting of Large PoultryStorage and RE-HEATING of Food Cook Chill DishesMain Oven Cooking Chart Hrs starting on shelf 4 until set and then on ‘SLOW COOK’ Setting Using the Slow Cook Setting for Slow CookingGuidance on Using the TOP Oven TOP OvenTo USE the TOP Oven Relighting the BurnerTOP Oven Cooking Chart TOP Oven Cooking Chart Care and Cleaning Oven Heat Clean LiningsReplacement of Oven Light Bulb Oven DoorsMain Oven Burner Maintanance InstructionsTOP OVEN/GRILL Do not USE Abrasives Something Wrong With Your Cooker Hotplate burnerDisposal Disposal of your productPage Guarantee After Sales Service