Hotpoint CH60GTCF, CH60GTXF installation instructions Auto Cooking Programmes, OT1

Page 18

OVEN TIMER OPERATION

AUTO COOKING PROGRAMMES

There are two Auto Cooking programmes that can be selected using your timer:-

(a)To set the timer to switch the oven(s) On and Off Automatically

(b)To set timer to switch on immediately and OFF automatically after a set cook period.

a) TO SET THE TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY

This allows you to cook at a specified time for a chosen period before the oven switches off Automatically.

Step 1 Check that the correct time of day is set, if not follow instructions for setting the time of day.

Step 2 Place food onto the correct shelf position in the oven and close the oven door(s).

0 . 0 0

A

. 2 0

OT1 4

U

 

A

. 2 0

OT1 6

U

 

A

. 2 0

OT1 4

U

 

 

 

A

. 2 0

OT1 6

U

 

Step 3 Press and hold in the Cook Period button. The display will read 0.00 with the 'cookpot' symbol lit.

Step 4 With the Cook Period button still held in, set the required Cook Period using the "+" and "-" buttons.

Release the buttons and the timer display will revert to the time of day with the 'Auto' symbol and 'cookpot' symbol lit.

Step 5 Press and hold in the End Time button. The display will read the earliest possible end time for the Cook Period that you have set above. The 'Auto' symbol and 'cookpot' symbol will be lit.

Step 6 With the End Time button still held in, use the "+" and "-" buttons to set the 'End Time' (i.e. The time you require the oven to switch off ).

Release all the buttons and the timer will revert back to the time of day.

The 'Auto' symbol will remain lit to signify that an Auto Cooking Programme has been set. The 'cookpot' symbol will go out.

Step 7 Turn the oven control(s) to the required temperature, and if necessary select the appropriate oven function.

At the end of the Automatic Cook Period the Auto Symbol will flash and an intermittent bleeping sound will be heard.

The audible tone will continue unless cancelled.

The 'Auto' symbol will continue to flash until the timer is returned to Manual operation (see below).

1 6 . 2 0

Step 8 Press the Manual button, the audible tone will be cancelled and the oven(s) will be returned to Manual.

Step 9 Turn the oven control(s) to the OFF position.

18PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Image 18
Contents Use and Installation Instructions Contents Introduction For Your Safety AlwaysNever Model Numbers CH60GTCF & CH60GTXF Installation InstructionsGAS Safety Installation & USE Regulations LocationTechnical Data Space for Fixing Cooker HoodsUnpacking the Cooker LevellingConversion for USE on Butane G30 or Propane G31 Connecting to GAS Supply Stability ChainElectrical Connection If the Fitted Plug is RemovedIf a Moulded Plug is Fitted Installation and Operational Checks Features Control Panel Control Knobs for the gas burnersAutomatic Cooking Guidance on Automatic CookingSymbols Oven Timer OperationTimer Function Buttons Auto Cooking ProgrammeSetting the Time of DAY Setting the Minute MinderAuto Cooking Programmes OT1Oven Timer Operation Other Notes on Timer Operation Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireGrill Remove Heat Shield From Shelf When Grilling for Maximum To USE the GrillRelighting the Burner Main Oven To USE the Main OvenStorage and RE-HEATING of Food Cold Start CookingRoasting of Large Poultry Cook Chill DishesMain Oven Cooking Chart Hrs starting on shelf 4 until set and then on ‘SLOW COOK’ Setting Using the Slow Cook Setting for Slow CookingTo USE the TOP Oven Guidance on Using the TOP OvenTOP Oven Relighting the BurnerTOP Oven Cooking Chart TOP Oven Cooking Chart Replacement of Oven Light Bulb Care and CleaningOven Heat Clean Linings Oven DoorsBurner Maintanance Instructions Main OvenTOP OVEN/GRILL Do not USE Abrasives Something Wrong With Your Cooker Hotplate burnerDisposal Disposal of your productPage Guarantee After Sales Service