Additional Features, Pause ’N Serve | Hamilton Beach 42884 manual

840155200 ENv01 7/7/06 1:53 PM Page 5

Control Panel (for clock models)

	ON/OFF Button	Hour
	Indicator Light
	Program/	Minute
	Automatic Brew	Minute
	Automatic Brew

Additional Features

Pause ’N Serve

This feature allows you to pour a cup of coffee before the entire brew cycle has completed. By removing the Carafe, the flow of coffee from the bottom of the Filter Basket will stop.

CAUTION: Return carafe to Keep-Hot Plate within 20 seconds. Hot water continues to flow into the Filter Basket when this feature is used. Overflowing coffee and hot water are burn hazards.

Automatic Shutoff

The Automatic Shutoff feature

shuts off the Keep-Hot Plate 2 hours after brew cycle begins. Always turn Coffeemaker OFF and unplug when finished.

To Set the Clock and Program Automatic Brew

NOTES:

•The Automatic Brew feature must be programmed each time it is used.

•Make sure you have placed the desired amount of water and coffee in the unit before using the Automatic Brew feature.

1.Plug in Coffeemaker. The numbers on the Clock will flash until the time is set.

2.Press the H button until the current hour is displayed. AM or PM will appear on display. Press the M but- ton until the current minute is displayed. The Clock is now set.

3.To program Coffeemaker to auto- matically begin brewing, press and hold the Prog/Auto button for two seconds to enter the setting mode.

While still pressing Prog/Auto, press

the H button to set hours and then press the M button to set minutes until the desired brew time is displayed.

4.To have Coffeemaker automatically begin brewing at a preset time, press Prog/Auto button momentarily. The Prog/Auto button will glow green to indicate Automatic Brew is set and coffeemaker is ready to begin brew- ing. “Auto” will appear in the display.

5.The Coffeemaker will shut off two hours after brewing begins.