Wells WFAE-55F Cradle Lift Lubrication, Cradle Roller Assemblies, Immediately, Keep Them Tight

Page 32

MAINTENANCE INSTRUCTIONS - CRADLE LIFT

WARNING WARNING: PINCH HAZARD

DISCONNECT FRYER FROM ELECTRIC POWER BEFORE

LUBRICATING CRADLE LIFT DRIVE SCREW

If power is not disconnected, lift motor may start unexpectedly,

causing serious injury

NOTE:

Failure to keep the cradle lift screw properly lubricated will result in premature wear

of the brass lift nut Wear caused by lack of proper lubrication is NOT covered by warranty.

Recommended frequency is “as required”, and, at a minimum, every six months. Lubricate cradle lift screw immediately if a grinding or rubbing noise is heard when basket is raising.

NOTE:

Smooth operation of the rollers is essential to the life of the frypot. If rollers do not turn freely during operation, they will soon wear grooves through the frypot wall.

IMPORTANT:

IF ROLLERS ARE FROZEN OR OTHERWISE FOUND TO NOT SPIN FREELY AFTER BEING THOROUGHLY CLEANED, REPLACE THEM

CRADLE LIFT LUBRICATION

Disconnect the fryer from electrical power.

Open rear access panel. Coat exposed threads of cradle lift screw with moly (molybdenum disulfide) grease.

Close access panel and restore electrical power.

CRADLE LIFT

DRIVE SCREW

GREASE

THREADS

ACCESS PANEL

BRASS

NUT

CRADLE LIFT

DRIVE MOTOR

CRADLE ROLLER ASSEMBLIES

DAILY: Wash cradle in a dishwasher or in a sink with warm water and mild soap or detergent.

363 300007 OpManual

IMMEDIATELY.

Wear to the FRYPOT caused by frozen rollers is not covered by warranty.

Thoroughly flush roller bearings with hot water (under a faucet or with a spray nozzle).

Rinse cradle thoroughly and dry completely.

Check rollers to be sure they roll freely.

Check the bearing nuts.

KEEP THEM TIGHT!

ROLLER

RETAINING NUT

for WFAE-50F/FS Electric Fryer

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents WFAE-55F 363 300007 OpManual for WFAE-50F/FS Electric Fryer Dimensions Electrical Specifications Domestic Export EU VoltagePower CapacitiesPower Switch TimerBuzzer Switch Filter Pump SwitchTemperature Control Power Outlet BOXReset Button Heater Interlock SwitchTime KEY Temp KEYDigital Readout UP Arrow KEYSonalert For Units with Solid Shortening Melt OptionContact Block Heater363 300007 OpManual for WFAE-50F/FS Electric Fryer STD E6070363 300007 OpManual for WFAE-50F/FS Electric Fryer Field Wiring WVAE-55FPRE-CLEANING Procedure Burn HazardWVAE-55FSPRE-CLEANING Procedure Burn HazardLift Cradle ReservoirFor Fryers with Vent Hood WVAE-55… Solid Shortening Melt OPTION. do not USE LardDetermine Maximum Load Weight SET Cook Timer and Load Product PRE-HEATING FryerBurn Hazard Cook Cycle and BuzzerProgramming KEY Functions Program Menu Times and Temperatures Using Function Keys Operation WFAE-55FSPRE-HEAT the Fryer To Cook ProductDrain Heater Safety Switch Cleaning Instructions Electric Shock HazardCleaning Instructions Tools PreparationFrequency Filter Leaf Assembly Bottom ScreenFiltering OIL 363 30007 OpManual for WFAE-55F/FS Electric Fryer Remember HOT OIL will Burn YOUOIL Disposal Container 4 NPT Street Elbow Cradle Lift Lubrication Cradle Roller AssembliesImmediately Keep Them TightTroubleshooting WFAE-55F Manual Controls Symptom Possible Cause Suggested RemedyTroubleshooting WFAE-55FS Solid State Controls Wells Bloomfield, LLC Genuin e Parts

WFAE-55F specifications

The Wells WFAE-55F is a high-performance commercial fryer that exemplifies efficiency and versatility in the culinary industry. Designed to meet the rigorous demands of restaurants and food service operations, the WFAE-55F stands out with its robust features and innovative technology.

One of the notable characteristics of the WFAE-55F is its powerful dual heating system. This fryer operates with a combination of high-performance gas burners and an advanced convection technology, ensuring that food is cooked evenly and efficiently. The unit provides fast recovery times, enabling chefs to prepare large quantities of food without compromising quality.

The WFAE-55F comes equipped with a generous oil capacity, allowing for cooking multiple menu items simultaneously without significant drops in oil temperature. This feature is particularly beneficial during peak service times, enhancing productivity in busy kitchens. The fryer’s oil filtration system is another standout feature, providing a simple and effective way to maintain oil quality, extending the life of the oil, and ensuring consistently great-tasting food while reducing operational costs.

Durability is a hallmark of the Wells WFAE-55F, constructed from high-grade stainless steel, which is resistant to corrosion and easy to clean. This design not only contributes to the longevity of the fryer but also helps in maintaining hygiene standards in commercial kitchens. The fryer is also designed with safety in mind, featuring a secure fry pot design to minimize spills and accidents.

User-friendly controls are also a part of the WFAE-55F’s appeal. The fryer features intuitive electronic controls that provide precise temperature management and monitoring, allowing chefs to set the desired cooking temperatures accurately. Additionally, the adjustable legs allow for versatility in installation, accommodating various kitchen layouts.

In terms of energy efficiency, the WFAE-55F is designed to minimize gas consumption while maximizing cooking performance. This not only reduces environmental impact but also helps businesses save on energy bills.

Overall, the Wells WFAE-55F is an exemplary model in commercial fryers, combining strength, efficiency, and advanced technology to meet the ever-evolving needs of the food service industry. Whether frying, sautéing, or preparing a variety of dishes, the WFAE-55F is a reliable companion in the kitchen that meets the high standards of professionals.
Top Page Image Contents