Care of Stainless Steel, Maintenance Instructions

MAINTENANCE INSTRUCTIONS

CARE OF STAINLESS STEEL

Stainless steel is a marvelous material: strong, lustrous and low maintenance. With a minimum of care, it will normally retain its beauty and durability for the life of the equipment. In some applications, however, special care is required in order to maintain stainless steel’s special prop- erties.

External components, such as cabinets and control panels, are finished with a grain pattern. This pleasing finish is best maintained by cleaning with a non-abrasive cleanser applied with a soft cloth. Rub only in the direction of the grain. In the absence of visible grain, rub only along the longest axis of the appliance.

Restore stainless steel’s luster by applying a polish specifically made for stainless steel. Spray on, wipe off with a soft cloth, rubbing in the direction of the grain.

Never use metal implements, wire brushes, abrasive scratch pads or steel wool to clean stainless steel.

Warmer pans, insets and other vessels are subject to a harsher environment. Wells Manufac- turing uses an very high quality stainless steel (#304DDQ) for our food warmer pans. Even the highest quality stainless steel, however, is mostly iron, and will rust, pit and corrode under the following conditions:

•Poor Water Quality: Hard water (water with a high content of dissolved minerals) will leave mineral deposits when allowed to dry. Calcium (lime) can buildup on heated surfaces, even under water. If left unattended, hard water spots and lime buildup can lead to rusting, corro- sion and pitting.

•Contact with Chlorides: Chlorides (specific compounds of chlorine) are found in food, ta- ble salt and many cleansers. Chlorides can attack the surface of stainless steel, resulting in corrosion and pitting.

Keep your stainless steel warmers clean and free from calcium buildup. Use alkaline, alkaline chlorinated or non-chloride cleanser.

Use citric acid-based cleaners to remove calcium deposits.

For additional information, please read the NAFEM Stainless Steel Equipment and Cleaning Guide. Contact NAFEM at :

North American Association of Food Equipment Manufacturers 401 N. Michigan Avenue

Chicago, Illinois 60611-4267 (312) 644-6610

HW-10, HW-SMP specifications

The Wells HW-SMP and HW-10 are two notable models in the well-established line of hybrid water heaters produced by Wells. These units have been designed to meet the diverse needs of commercial enterprises, combining cutting-edge technology with efficient performance to provide a reliable source of hot water.

The Wells HW-SMP model features a state-of-the-art temperature control system that ensures precise water heating, making it ideal for settings that require consistent hot water supply. This model offers a capacity ranging from 10 to 50 gallons, allowing it to serve a wide variety of applications, from small restaurants to larger commercial kitchens. Its compact design facilitates easy installation in limited spaces, while the sturdy construction ensures durability and longevity.

Contributing to its energy efficiency is the advanced insulation technology utilized in the HW-SMP. This reduces heat loss, maintaining the water temperature at optimal levels without excessive energy consumption. The unit also features a user-friendly digital display, providing real-time feedback on water temperature and system status, which simplifies operation and monitoring.

On the other hand, the Wells HW-10 is specifically designed for high-demand applications. This model has a higher capacity and is equipped with a powerful heating element, allowing it to deliver hot water quickly and efficiently. The HW-10 incorporates a dual heating system that can automatically switch between gas and electric power sources, ensuring uninterrupted service even during peak demand periods.

Both models utilize an innovative heat exchanger technology, which maximizes thermal efficiency while minimizing energy costs. This feature is particularly important in commercial kitchens where constant access to hot water is essential for cooking, cleaning, and sanitizing.

Additionally, both the HW-SMP and HW-10 are built with user safety in mind. Integrated safety features include thermal protection systems that prevent overheating and ensure safe operation in busy commercial environments. The units are also compliant with local safety standards, making them a trustworthy choice for business owners.

In conclusion, the Wells HW-SMP and HW-10 models embody a combination of energy efficiency, technology, and practicality. Their features and specifications cater to the demanding requirements of commercial food service, making them invaluable assets for any establishment seeking reliable hot water solutions.