DeLonghi ESAM4400 Rinsing Completed Turn Knob, TEMP. Warm, OFF After 1 Hour, Water Hardness

Page 19

Hot water will run off from the cappuccino frother into the container below and the appliance displays:

RINSING

• When the water tank is empty, the appliance displays the message:

RINSING COMPLETED TURN KNOB

Turn the steam knob clockwise as far as it will go (fig. 4) and refill the water tank with clean water.

The descale program is now complete and the appliance is ready to make coffee again.

NOTE: if the descaling cycle is interrupted before completion, the appliance continues to display the descale message and the program must be started again from the beginning.

IMPORTANT: FAILURE TO DESCALE THE APPLIANCE REGULARLY INVALIDATES THE GUARANTEE.

12.4 Changing coffee temperature

 

To change the temperature of the coffee, proceed as follows:

 

• Press the

button (the light over the button comes on) then press the

button repeatedly until

the appliance displays:

TEMP. WARM

Press the

button until the appliance displays the desired coffee temperature

Press the

button to confirm the temperature selected;

 

 

Press the

button to exit programming mode or

to change other parameters.

12.5 Changing the length of time the appliance remains on

 

 

The appliance is factory preset to go off automatically one hour after the last coffee has been made.

The number of hours the appliance remains on can be increased as follows:

 

Press the

button (the light over the button comes on) then press the

button repeatedly until

 

the appliance displays:

 

 

OFF AFTER 1 HOUR

Press the

button to change the number of hours the appliance remains on

Press the

button to confirm the value;

 

Press the

button to exit programming mode or

to change other parameters.

12.6 Setting water hardness

The descale message is displayed after the appliance has been operated for a factory set period of time cal- culated on the basis of the maximum quantity of lime scale which may be contained in the water used. If necessary, this period of operation can be extended, making descaling less frequent, by programming the appliance based on the actual lime content in the water used. Proceed as follows:

Remove the "Total Hardness Test" strip (enclosed on page 2) from its packaging then dip it fully in the water tank for a few seconds. Remove it and wait about 30 seconds (until it changes color and a num- ber of dots are formed);

Turn the appliance on by pressing the

button (fig. 6).

 

Press the

button (the light over the button comes on) then press the

button repeatedly

 

until the appliance displays:

 

 

WATER HARDNESS 4

18

Image 19
Contents Fiducia Italiana S.A DE C.V Caratteristiche Elettriche 120V˜60HZ 1350W Uniti e CanadaPage Page Page Page Index Important Safeguards Control panel Menu Bean container lid Safety WarningsCoffee spout adjustable in height Description seeTurn the Steam Knob Press OK to select EnglishEnglish selected Fill TankRinsing Completed Please Wait Preparing Coffee Using Coffee BeansTurning OFF Please Wait Heating UP Please WaitEmpty Grounds Container Regulating the Coffee Mill Changing the Quantity of Coffee in the CUPButton is pressed Ready HOT Water Ready PRE-GROUNDProducing HOT Water Cleaning and Maintenance Preparing Cappuccinos Using SteamSteam Bottom pipe on the infuser Until it clicks into placeAfter having heard the click Snapped outCorrect Incorrect Changing and Setting the Menu ParametersClock Start TimeDescaling Completed Turn Knob AUTO-START noDescale Descale noOFF After 1 Hour RinsingRinsing Completed Turn Knob TEMP. WarmChanging the Language Reset to Default noTroubleshooting ContainerGenerica alarm Problem Cause Solution Ver the coffee Ground coffee is beingDoor Limited Warranty Table DES Matières Mesures DE Securite Importantes Description DE L’APPAREIL Voir Lisez Attentivement CE Mode D’EMPLOI ET CONSERVEZ-LEConsignes DE Sécurité Remplir LE Réservoir Première Mise EN ServiceAppuyer SUR OK Pour Programmer Français Français ProgramméMachine Prête forte Arrêt EN Cours Veuillez PatienterChauffage Veuillez Patienter Rinçage terminé Veuillez PatienterVider LE Tiroir À Marc Réglage DU Moulin À Café Modification DE LA Quantité DE Café EN TasseMachine Prête EAU Chaude Machine Prête PrémouluSortie D’EAU Chaude 10 Préparation DU Cappuccino Avec LA Vapeur VapeurNettoyage ET Entretien ’axe doit être introduit dans le tube infé Tube inférieur de l’infuseurSupport Axe Rieur de l’infuseurModification ET Programmation DES Paramètres DU Menu HorlogeMarche OuinonDétartrage OUI Automatique NONDÉTARTrer Détartrage NONArrêt Après 1 Heure RinçageRinçage Terminé Tourner LE Bouton Température MoyenneSignification DU Message Affiché ET QUE Faire Dureté EAUPROGRAM. Usine NON Modification DE LA LangueIntroduire LA Mouture GrainsProblèmes Solubles Avant D’APPELER L’ASSISTANCE Technique Problèm Cause SolutionAu lieu de sortir par les Fait pas de caféBuses, le café coule le Page Índice Conserve Estas Instrucciones ¡LEA Detenidamente Y Guarde Estas Instrucciones Descripción DEL Aparato Véase LA PÁGAdvertencias DE Seguridad Piloto MenúGirar Vapor Pulsar OK Para Instalar EspañolEspañol Instalado Llenar DepósitoLista Para EL USO Sabor fuerte Apagado EN SE Ruega EsperarCalentamiento SE Ruega Esperar Enjuague completo SE Ruega EsperarVaciar Cajón Posos Regulación DEL Molinillo DE Café Modificar LA Cantidad DE Café EN LA TazaLista Para EL USO Agua Caliente Lista Para EL USO PremolidoErogación DE Agua Caliente Preparación DEL Capuchino Utilizando Vapor VaporLimpieza Y Mantenimiento Correcto Incorrecto Modificar Y Configurar LOS Parámetros DEL MenúReloj Auto onDescalcificación SÍ Autoencendido noDescalcificación Descalcificación noOFF Después DE 1 H EnjuagueEnjuague Completo Girar Mando Temperatura MediaMensaje Significado QUÉ Hacer Valores Fábrica noModificar LA Lengua Significado DEL Mensaje Visualizado Y QUÉ HacerPulsar NEXT+ Change Problema Causa Solución El café no sale por las Se ha utilizado el caféPremolido en lugar de Por la cafeteraExclusiones de la garantía Duración de la garantíaFecha DE Compra GarantiaPara Mexico solamente Cafetera Electrica Modelo ESAM4400Indice Avvertenze Importanti Leggere Attentamente E Conservare Queste Istruzioni Descrizione DELL’APPARECCHIO Vedere PAGAvvertenze DI Sicurezza Spia MenuRuotare manopola vapore Premere OK per installare italianoItaliano installato Riempire serbatoioPronta all’uso gusto normale Spegnimento in corso attendere pregoRiscaldamento ATTENDERe Prego Risciacquo completo attendere pregoNota 3 Consigli per ottenere il caffè più caldo Svuotare Contenitore FondiRegolazione DEL Macinacaffè Modifica Della Quantità DI Caffè in TazzaPronta All’uso acqua calda Pronta alL’USO PRE-MACINATOErogazione DI Acqua Calda Preparazione DEL Cappuccino Utilizzando IL Vapore VaporePulizia E Manutenzione Sterno Push fino a sentire il clic diAggancio Dopo aver sentito il click diModifica E Impostazione DEI Parametri DEL MENU’ OrologioAccensione Corretto ErratoDecalcificazione SI Autoaccensione noDecalcificare Decalcificazione noParametri Programmazione della durezza dell’acqua RisciacquoRisciacquo COMPLETo Ruotare Manopola Spegni Dopo 1 ORARuotare manopola Premere OK PER Installare ItalianoDurezza Acqua Valori Fabbrica noInserire gruppo Infusore Problema Causa Rimedio Problemi Risolvibili Prima DI Chiamare Lassistenza TecnicaVizio Si è utilizzato il caffèPremacinato al posto Na non eroga il caffè

ESAM4400 specifications

The DeLonghi ESAM4400 is a remarkable fully automatic espresso machine that has gained popularity among coffee enthusiasts for its versatility and performance. This device combines elegance with functionality, making it a perfect addition to any kitchen or coffee bar.

One of the standout features of the ESAM4400 is its integrated burr grinder, which ensures that coffee beans are ground fresh for each cup. This technology enhances the flavor and aroma of the coffee while allowing users to adjust the grind size to match their personal preferences. The machine also features a convenient bean container that can hold up to 200 grams of coffee beans, reducing the frequency of refills.

The ESAM4400 showcases an intuitive control panel with an easy-to-read display. Users can effortlessly select their desired coffee strength, cup size, and temperature, while the programmable settings allow for customized brewing options. This machine accommodates a variety of drinks, from espresso to cappuccino, allowing users to enjoy barista-quality beverages at home.

Another notable characteristic of the ESAM4400 is its advanced milk frother, which incorporates a unique cappuccino system. This system is designed to automatically combine steam and milk, creating rich, creamy froth that elevates any coffee experience. The adjustable milk frother allows users to customize the milk texture for different beverages, making it suitable for lattes, macchiatos, and more.

The DeLonghi ESAM4400 also stands out in terms of ease of maintenance. The removable brewing unit and drip tray make cleaning simple, while the auto-rinse feature ensures that the machine is always ready for use. It also includes a water filter that helps maintain the quality of each brew and prolongs the lifespan of the machine.

In terms of design, the ESAM4400 boasts a sleek and modern aesthetic, making it a stylish addition to any countertop. Its compact size makes it suitable for kitchens with limited space, while the stainless steel accents provide a touch of elegance.

Overall, the DeLonghi ESAM4400 offers a comprehensive solution for coffee lovers seeking convenience without sacrificing quality. With its range of features, advanced technologies, and user-friendly design, this espresso machine is capable of delivering café-style beverages right at home, ensuring a satisfying coffee experience every time. Whether you are a casual drinker or a dedicated aficionado, the ESAM4400 is a reliable companion for all your coffee needs.