Wells BWB-1S manual Wiring Diagram, Bypass HI-LIMIT Thermostat

G.BYPASS HI-LIMIT THERMOSTAT

1.The hi-limit thermostat in this Belgian Waffle Baker has been found to be unnecessary. Wells BWB-1S has been tested and approved by UL for use without the hi-limit thermosat.

2.All units requiring service, whether in or out of warranty, should have the hi-limit thermostat bypassed.

3.With the power cord unplugged, remove wires

7 & 19 from the hi-limit thermostat (located in the bottom grid).

4.Cut the push-on terminals from wires 7 & 19, as close to the terminals as possible.

5.Remove 1/2”of insulation from the ends of wires

7 & 19. Connect the wires together using a ceramic wire nut of the appropriate size.

6.Plug the waffle baker in, and test for proper operation.

HI-LIMIT THERMOSTAT

7	7
19	19

CERAMIC

WIRE NUT

WIRING DIAGRAM

CONNECTOR (2)

POWER
SWITCH	4

white	1		L1						3		TEMPERATURE
											CONTROLLER
black	2		L2
									3	2	1
green	10								7
			17						4	5
POWER CORD											8
	INDICATOR								LOWER
	LIGHT
									HEATING
									ELEMENT		TEMP.
							TIMER				SENSOR
										20
	11	2	3	4	5		6	13	6	5	12
	1
	14								MICRO
	BUZZER								SWITCH
							N.C.
								COM	UPPER
						15		N.O.	HEATING
									ELEMENT
16				9

VOLTS	AMPS 1Ø	p/n 44867 Rev.D
120	7.5	50/60 Hz

11