Hobart FT900SDBD Curtains and Drainback PANS, Model FT900D, To L Operation Center Section

CURTAINS AND DRAINBACK PANS, MODEL FT900D

Curtains and drainback pans must be in their proper places, Fig. 32 . . .

•Hang a short curtain at the unload side of every upper prewash, wash, power rinse and dual rinse arm.

•If equipped with a blower-dryer, hang another short curtain after the final rinse arm.

•Hang a long curtain on both sides of the prewash / wash section joint and the wash / power rinse section joint.

•Hang two long curtains at the load end.

•Hang one long curtain at the unload end.

•Drainback pan locations are shown for reference only.

FT900D
R TO L OPERATION
8' CENTER SECTION
SHORT CURTAIN	FINAL RINSE ARM
ONLY WHEN	DUAL RINSE ARM
BLOWER-DRYER
	POWER RINSE ARM	WASH ARM	PREWASH ARM
IS PRESENT
FOUR SHORT
CURTAINS
AT UNLOAD SIDE
OF UPPER ARMS			THREE PAIRS OF
ONE LONG CURTAIN			LONG CURTAINS
AT UNLOAD END
UNLOAD			LOAD
	TWO LONG & THREE SHORT
DUAL RINSE	DRAINBACK PANS
DRAINBACK PAN	STRAINERS

FT900D	FINAL RINSE ARM
L TO R OPERATION	FINAL RINSE ARM
8' CENTER SECTION	DUAL RINSE ARM
PREWASH ARM	WASH ARM POWER RINSE ARM

THREE PAIRS OF

LONG CURTAINS

TWO LONG & THREE SHORT

DRAINBACK PANS

STRAINERS

SHORT CURTAIN

ONLY WHEN

BLOWER-DRYER

IS PRESENT

FOUR SHORT

CURTAINS

AT UNLOAD SIDE

OF UPPER ARMS

ONE LONG CURTAIN AT UNLOAD END

DUAL RINSE

DRAINBACK PAN

Fig. 32

– 12 –