Operation and Care of
FT900 SERIES DISHWASHERS
SAVE THESE INSTRUCTIONS
OPERATION
MACHINE PREPARATION — Check before beginning operation.
Open the machine doors and make sure all components are in their proper operating positions.
Pump Intake Screens must be put on | Strainer Pans must be in place on top of | Strainer | Baskets must be in place in |
holders at each pump intake (Fig. 1). | each tank (Fig. 2). | Strainer Pans (Fig. 3). | |
Fig. 1 | Fig. 2 | Fig. 3 |
End Caps must be correctly installed at ends of all Wash Arms (Fig. 4).
Wash Arms must be properly installed and latched in place (Fig. 5).
The Flush Arm at load end must be properly installed (Fig. 6).
Fig. 4 | Fig. 5 | Fig. 6 |
The Final Rinse Arm (and Dual Rinse Arm when present) must be properly installed (Fig. 7).
Curtains and drainback pans must be in their proper places, refer to pages 11 – 14.
Fig. 7
– 3 –