Frymaster Protector Series operation manual Bulk Oil Systems

1.Open the cabinet and slide the JIB from the cabinet (see Figure 5).

2.Remove the cap and pour any remaining oil in the container into all fry vats equally (see Figure 6).

Figure 6

Figure 5

3. With the jug upright remove the cap and 4. Put the tube in the new full container (see Figure 8). foil seal (see Figure 7).

Figure 7

WARNING: Do not add

HOT or USED oil to a JIB.

3.5.4Bulk Oil Systems

Figure 8

5.Slide the JIB onto the shelf inside the fryer cabinet (as seen in Figure 5).

6.Press the JIB reset switch to turn the JIB LED off (see Figure 9).

Figure 9

If using a bulk oil system, see manufacturer’s instructions for filling JIB and oil disposal.

WARNING:

Do not add HOT or

USED oil to a JIB.

3-6