Frymaster OCF30 Check the Controller Set Point Accuracy, Annual/Periodic System Inspection, Fryer

Page 26

DANGER

Remove all drops of water from the frypot before filling with oil. Failure to do so will cause spattering of hot liquid when the oil is heated to cooking temperature.

5.3.3Clean Detachable Parts and Accessories – Weekly

Wipe all detachable parts and accessories with a clean, dry cloth. Use a clean cloth saturated with detergent to remove accumulated carbonized oil on detachable parts and accessories. Rinse the parts and accessories thoroughly with clean water and wipe dry before reinstalling.

5.4MONTHLY CHECKS AND SERVICE

5.4.1 Check the Controller Set Point Accuracy

(This check applies only to units equipped with 3000 or CM3.5 Controllers.)

1.Insert a good-grade thermometer or pyrometer probe into the oil, with the end touching the fryer temperature-sensing probe.

2.When the 3000 controller displays “DROP” or the CM3.5 displays a product or dashed lines

(indicating that the frypot contents are within the cooking range), press the switch once to display the temperature and setpoint of the cooking oil as sensed by the temperature probe. The setpoint is the temperature with a dot after it.

3.Note the temperature on the thermometer or pyrometer. All three readings should be within

± 5ºF (2ºC) of each other. If not, contact an Factory Authorized Servicer for assistance.

5.5Annual/Periodic System Inspection

This appliance should be inspected and adjusted periodically by qualified service personnel as part of a regular kitchen maintenance program.

Frymaster recommends that this appliance be inspected at least annually by a Factory Authorized Servicer as follows:

5.5.1 Fryer

Inspect the cabinet inside and out, front and rear for excess oil.

Verify that the heating element wires are in good condition and that leads have no visible fraying or insulation damage and that they are free of oil.

Verify that heating elements are in good condition with no carbon/caramelized oil build-up. Inspect the elements for signs of extensive dry-firing.

Verify that the tilt mechanism is working properly when lifting and lowering elements, and that the element wires are not binding and/or chafing.

Verify the heating-element amp-draw is within the allowed range as indicated on the appliance’s rating plate.

5-3

Image 26
Contents Hour Service Hotline Oil Conserving Fryer OCF30 Electric Series FryersCanada Page Table of Contents Table of Contents Operator Troubleshooting Definitions Computer InformationEuropean Community CE Specific Information Shipping Damage Claim Procedure Service InformationOCF30 II Series Electric Fryers Installation Instructions General Installation RequirementsClearance and Ventilation Power Requirements Australian RequirementsPage OCF30 Series Electric Fryer Operating Instructions Finding Your WAY around the OCF30 Series Electric FryerEquipment Setup and Shutdown Procedures SetupPrepare the System for Use Install the Oil ReservoirOptional Oil Attendant Automatic Top-Off Routine Oil Changes OCF30 Series Electric Fryers Filtration Instructions Preparation for Use with the Magnasol Filter Assembly Filtration Filter Pump Reset Switch Cleaning Reassembly Draining and Disposing of Waste OilPage Clean Inside and Outside of the Fryer Cabinet Daily OCF30 Series Electric Fryers Preventative MaintenanceInspect Fryer and Accessories for Damage- Daily Page Fryer Check the Controller Set Point AccuracyAnnual/Periodic System Inspection Built-In Filtration System OCF30 Series Electric Fryers Operator Troubleshooting IntroductionTroubleshooting Controller and Heating Problems Error Messages and Display ProblemsBasket Lift Problems Or LOw tempFiltration Problems Auto Top-Off ProblemsError Log Codes For 3000 Controller Only ExplanationPage OCF30 Series Electric Fryers Wiring Diagrams OCF30 Series Simplified Wiring with 3000 ControllerComponent Wiring with 3000 controller Domestic Component Wiring with CM3.5 controller Domestic Component Wiring with CM3.5 Controller CE Component Wiring with CM3.5 Controller CSA Contactor Box Delta Configuration Contactor Box WYE Configuration Assembled melter is shown in position OCF30 Series Electric Fryer Appendix B Solid Shortening Melter UseOCF30 Series Electric Fryer Appendix C Bulk OIL Instructions Bulk Oil SystemsDispose of Waste Oil Do not add HOT or Used oil to a JIBFilling the JIB Fill Vat from Bulk Tank Service Hotline
Related manuals
Manual 46 pages 29.51 Kb

OCF30 specifications

The Frymaster OCF30 is a state-of-the-art commercial fryer designed for efficiency, reliability, and versatility in high-demand kitchen environments. As part of the Frymaster family, this model is known for its innovative features that cater to various cooking needs, making it a popular choice among restaurant operators and culinary professionals.

One of the standout features of the OCF30 is its advanced oil filtration system. This feature enables operators to maintain oil quality for longer periods, resulting in better-tasting food and reduced oil consumption. The integrated filtration system can be operated on-demand or set to automatically filter oil at specific intervals, ensuring that the oil remains clean and enhancing food flavor consistently.

The OCF30 fryer also employs innovative heating technology, offering rapid temperature recovery. This allows for quicker cooking times and maximizes productivity during peak hours. With the ability to reach high temperatures swiftly, chefs can efficiently manage multiple orders without compromising on food quality.

Energy efficiency is another hallmark of the Frymaster OCF30. It is designed to minimize energy consumption while still delivering powerful cooking performance. This not only helps in reducing operational costs but also contributes to a more environmentally sustainable kitchen practice.

User-friendly controls and a digital display are integral to the OCF30's design, allowing for precise temperature management and easy monitoring of cooking times. Features such as programmable cooking settings enable chefs to replicate the cooking process with accuracy, ensuring consistency in food preparation.

The design of the OCF30 includes safety features that protect both the operator and the equipment. The fryer is equipped with built-in safeguards against overheating, and its construction includes durable materials that can withstand the rigors of a commercial kitchen.

In summary, the Frymaster OCF30 is a top-tier choice for commercial frying operations. With its advanced oil filtration system, rapid temperature recovery, energy efficiency, user-friendly controls, and safety features, it is engineered to enhance productivity and maintain food quality, making it an invaluable asset for any busy kitchen.