Caster/Leg Installation | Frymaster 17C, 17SMS, 17BC specs

2.2Caster/Leg Installation

Depending upon the specific configuration ordered, your unit might have been shipped without in- stalled casters or legs. If casters or legs are installed, you may skip this section and proceed to Sec- tion 2.3, Pre-Connection Preparations.

If your unit requires the installation of casters/legs, install them in accordance with the in- structions included in your accessory package.

2.3Pre-Connection Preparations

After the unit has been positioned in the area where it will be used, ensure the following have been accomplished before connecting the unit to the electrical power source:

1.This equipment must be stabilized by installing restraining chains on units equipped with casters or anchor straps on units equipped with legs. Follow the instructions shipped with the casters/legs to properly install the chains or straps.

2.Level units equipped with legs by screwing the legs out approximately 1 inch, then adjusting them so that the unit is level.

For units equipped with casters, there are no built-in leveling devices. The floor where the unit is to be installed must be level.

3.Install the basket lift arms (on units so equipped) on the lift rods (located at the top rear of the cabinet) so that the basket lift rollers guides the lift arms.

NOTE: Some adjustment of the rollers may be necessary for free movement of the basket lift arms.

4.If so equipped, connect the water hose(s) to the fitting(s) at the rear of the unit and connect the unit to the water supply.

CAUTION

Incoming water pressure for all units should be approximately 40 PSI (2.8kg/cm2).

DANGER

The maximum allowable incoming water pressure for all units is 80 PSI (5.62 kg/cm2). The maximum allowable incoming water temperature for all units is 180ºF (82ºC).

WARNING

To prevent back flushing, the connection piping should be installed with a vacuum breaker

or means of providing an air gap 1” (2.54 cm) above the cookpot rim.

NOTE: On units equipped with water hoses, the hoses come with a quick-disconnect coupl- ing. The quick disconnect may be attached to the unit or to the water supply line, or it may be left off entirely, whichever you prefer. If the unit is to be moved frequently (for cleaning or preventive maintenance), Frymaster recommends installing flexible water lines. If the cooker is hard-plumbed then moved, the connections may loosen and eventually cause leaks.

2-2

17C, 17BC, 17SMS specifications

Frymaster is a renowned name in the commercial kitchen equipment industry, and its fryers are a cornerstone for many food service operations. Among its notable models are the Frymaster 17BC, 17SMS, and 17C, each designed to meet the varying needs of busy kitchens with a focus on efficiency, reliability, and user-friendly operation.

The Frymaster 17BC is an innovative electric fryer that showcases a unique open frypot design, allowing for superior heat conduction and oil circulation. This model is equipped with a powerful heating system that provides fast recovery times, ensuring that food maintains its quality during peak service hours. The 17BC features an intuitive control panel that simplifies the frying process, providing precise temperature control and programmable cooking timers. This model also emphasizes energy efficiency, helping businesses reduce operational costs while still achieving high-quality fried foods.

The Frymaster 17SMS is an advanced gas fryer known for its versatility and advanced cooking technology. One of its standout features is the SmartOil management system, which continuously monitors and manages oil quality, extending the life of the oil and maintaining consistent frying results. The 17SMS is designed for optimal safety, equipped with features like automatic flame monitoring and an efficient heat exchange system that minimizes the risk of overheating. This fryer also boasts a compact design, making it suitable for kitchens with limited space while still allowing for high-volume frying capability.

The Frymaster 17C is a classic yet modern fryer built with the intention of providing operators with a user-friendly experience. It comes standard with enhanced filtration systems that ensure the oil remains clean and free from contaminants, thus improving the taste and quality of the fried products. The 17C also includes a sturdy stainless steel construction, which not only enhances its durability but also makes cleaning a breeze. Additionally, this fryer is packed with safety features, ensuring that operators can work in a secure environment.

All three of these Frymaster models reflect the company’s commitment to innovation and performance. With features such as easy maintenance, energy efficiency, and high output capabilities, the 17BC, 17SMS, and 17C meet the high demands of commercial food establishments while delivering consistent and delicious fried foods. The combination of superior technology and thoughtful design makes these fryers an excellent choice for anyone seeking reliability in their kitchen equipment.