Jenn-Air W10379137A manual Panel Kit Installation Requirements, Custom Wood Overlay Panels

Standard Installation - Full Product View Panel Kit Installation - Full Product View

Panel Kit Installation Requirements

See the “36" Models” or the “42" French Door Models” section to see the panel kit options available for your model.

IMPORTANT:

■A Panel Kit installation can be achieved with either a 24"

(60.9 cm) or 25" (63.5 cm) deep opening.

■A standard grille is used to achieve a Panel Kit installation. Use the standard grille bracket (provided with refrigerator) to attach the standard grille.

■The grille panel height, shown in the Standard Installation Flush Grille graphic, allows for an air gap critical to refrigerator performance.

Standard Grille Bracket

Panel Kit Installation - Side View

A

B

C

Custom Wood Overlay Panels

Custom wood overlay panels allow you to blend the exterior of your refrigerator into the overall kitchen décor and to use custom handles for additional design flexibility.

In some cases, your cabinet manufacturer may choose to work with one panel routed for the different dimensions. Follow these panel dimension and placement instructions to be sure that the custom wood overlay panels will fit properly.

IMPORTANT:

■For 36" (91.4 cm) models, the refrigerator door wood overlay panel cannot exceed 60 lbs (27.2 kg) and the freezer drawer overlay panel cannot exceed 25 lbs (11.3 kg).

■For 42" (106.7 cm) models, the refrigerator door wood overlay panel cannot exceed 38 lbs (17.2 kg) and the freezer drawer overlay panel cannot exceed 30 lbs (13.6 kg).

■The weight of the top grille wood overlay panel cannot exceed 7 lbs (3.2 kg) for both models.

■The required thickness for all panels is ³⁄₄" (1.91 cm).

■This installation does not require filler or backer panels.

		D
A. Soffit	C. Grille panel
B. Airflow	D. Door panel

15