
Product Dimensions
IMPORTANT:
■The depth from the front face of the doors to the back of the refrigerator cabinet is 24" (60.96 cm) without panels.
■The power cord is 84" (213 cm) long.
■The water supply line is located at the front of the refrigerator.
Top View
A
24"
(61.0 cm)
Model | A |
4241³⁄₄" (106 cm)
4847³⁄₄" (121.3 cm)
Front View
■Width dimensions were measured from hinge to hinge.
*84"
(213.4 cm)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| A |
|
|
|
|
|
|
|
|
|
|
|
| following) | |||||||
|
|
|
|
|
|
|
| |||||
|
|
| (see chart |
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Model |
| Width A (hinge edge to hinge | ||||||||||
|
|
|
| edge) | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
42 |
|
|
| 41³⁄₄" (106 cm) | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
48 |
|
|
| 47³⁄₄" (121.3 cm) | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Tipping Radius
Be sure there is adequate ceiling height to stand the refrigerator upright when it is moved into place.
■The dolly wheel height must be added to the tipping radius when a dolly is used.
■If needed, the tipping radius can be reduced. See “Reduce Tipping Radius.”
Side Tipping Radius
The side tipping radius varies depending upon the width of the model. Use the chart provided to determine the side tipping radius.
NOTE: Tip on side only.
A
Model Tipping Radius A
4291³⁄₈" (232.1 cm)
4894³⁄₈" (239.7 cm)
Door Swing Dimensions
The location must permit both doors to open to a minimum of 90°. Allow 4¹⁄₂" (11.4 cm) minimum space between the side of the refrigerator and a corner wall.
NOTE: More clearance may be required if you are using wood overlay panels, custom handles, or extended handles.
A B | C D |
| 90˚ |
| 110˚ |
| 90˚ |
| 110˚ |
Model | A | B | C | D |
|
|
|
|
|
42 | 40³⁄₄" | 39³⁄₄" | 45³⁄₈" | 46³⁄₄" |
| (103.5 cm) | (101.0 cm) | (115.3 cm) | (118.8 cm) |
|
|
|
|
|
48 | 43¹⁄₄" | 42" | 48⁵⁄₈" | 50¹⁄₄" |
| (109.9 cm) | (106.7 cm) | (123.5 cm) | (127.6 cm) |
|
|
|
|
|
9