Bloomfield WVOC-2HFG, WVOC-2HSG operation manual Temperature Calibration, Hot Surface

Page 27

MAINTENANCE INSTRUCTIONS (continued)

D. TEMPERATURE CALIBRATION

TOOLS: Digital Pyrometer with Oven Probe, Protective Gloves

1.With the oven empty, clamp the thermocouple sensor in the center of the middle rack:

a.Pass the thermocouple sensor wires through the corner of the door gasket and close the door.

b.Plug the sensor into the Pyrometer.

2.Turn the OVEN POWER (V.01) switch to ON. Turn the FAN switch (V.02) to HI.

a.Rotate the TIME control (V.06) until the time digits (V.05B) on the display read "60:00".

b.Rotate the TEMP control (V.07) until the temp digits (V.05A) display 375º.

c.Press the START TIMER key (V.08).

3.Allow the oven to heat for 45 minutes. If, after 45 minutes, the temperature display reads between 370º and 380º, the calibration is satisfactory. Otherwise:

a.Rotate the TIME controller until the time digits (V.05B) on the display read "00:00".

b.Rotate the TEMP control until the temp digits (V.05A) display between 400º and 500º.

c.Press and hold the START TIMER (V.08) key for five seconds.

d.Turn either the TIME or TEMP control until the desired offset is displayed.

e.Press the ACTUAL TEMP (V.09) key to exit. Procedure is complete.

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch and may cause burns.

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Important do not Discard this Manual 505Limited Warranty Statement Table of Contents SpecificationsIntroduction Features & Operating Controls Description Comment Ventilator SectionFeatures & Operating Controls Ventilator Section Controls Cooking Appliance ControlsDescription Comment Electric Shock hazard Precautions and General InformationAgency Listing Information Operational NotesSTD Installation SetupUnpacking & Inspection Electric Shock Hazard Service Technician Installation NotesElectrical Installation This is Responsibility InstallerFire Suppression System Installation Fire HazardAuthority Having Jurisdiction Filter Installation Filters InstallationDo not Operate Unless Grease CUP is Installed Grease Trough and Grease CUP InstallationHotplate Drip PAN Installation Spiral Heating Elements only Oven Rack InstallationHot Surface Ventilator OperationOperation PRE-FILTER ElementSuggested Cooking Times Convection Oven Product Temp Time Number Minutes RacksGriddle Product Temp Time Minutes Electrical Shock Hazard Manual Cook ModeProgram Cook Mode Convection Oven Operating InstructionsSeasoning Temperature Offset ModeGriddle Operating Instructions Burn HazardCooking with Your Hotplate Hotplate Operating InstructionsConvection Oven Cleaning Instructions Cleaning InstructionsGriddle Exterior Griddle Cleaning InstructionsTools Hotplate Cleaning InstructionsPrecautions FrequencyFrequency Weekly Ventilator Section Cleaning InstructionsCleaning PreparationTroubleshooting Suggestions Personal Injury Hazard Maintenance InstructionsFAN Cleaning Latch AdjustmentHinge Adjustment Maintenance InstructionsTemperature Calibration Ansul Health Hazards Page Page Fire Hazard Maintenance SchedulesDescription Service

WVOC-2HFG, WVOC-2HSG specifications

The Bloomfield WVOC-2HSG and WVOC-2HFG models represent the cutting edge in advanced automation and control systems designed for diverse industrial applications. These systems serve as pivotal tools for optimizing processes, enhancing efficiency, and ensuring precise monitoring of various operations across numerous sectors.

One of the main features of the Bloomfield WVOC-2HSG and WVOC-2HFG is their dual functionality, which allows for simultaneous management of multiple process parameters. The WVOC-2HSG variant is tailored for high-speed data acquisition and processing, making it suitable for environments where real-time monitoring is crucial. In contrast, the WVOC-2HFG offers enhanced flexibility with its feature-rich interface and robust control capabilities, catering to applications that demand customization and adaptability.

Both models leverage advanced technologies such as Internet of Things (IoT) connectivity, enabling seamless integration with existing infrastructure. This connectivity facilitates remote monitoring and control, allowing operators to access data from anywhere, thus improving decision-making and response times. The cloud-based analytics feature further empowers users to generate insights from historical data, leading to better predictions and proactive maintenance strategies.

In terms of characteristics, the Bloomfield WVOC-2HSG and WVOC-2HFG systems come equipped with high-resolution displays and intuitive user interfaces. These interfaces are designed to minimize the learning curve for new users while providing seasoned operators with the tools needed for complex tasks. The systems also include a variety of input and output options, making them compatible with a wide array of sensors and actuators.

Durability is another significant characteristic of these models, as they are engineered to withstand challenging industrial environments. Built with rugged materials, they are resistant to dust, moisture, and extreme temperatures, ensuring reliable performance over time.

Moreover, safety features are seamlessly integrated into these systems, with built-in alarms and redundancy mechanisms designed to prevent operational failures. This commitment to safety underscores Bloomfield's dedication to providing not only performance but also peace of mind for operators.

In conclusion, the Bloomfield WVOC-2HSG and WVOC-2HFG models stand out as premier solutions in industrial automation, showcasing a blend of innovative technology, user-centric design, and enhanced durability. Whether for real-time data processing or flexible control capabilities, these systems are set to redefine standards in operational efficiency and reliability across various industries.
Top Page Image Contents