AEG CG 6400 manual Overview of the menu items, Menu mode, Before using for the first time

Page 11

g

4Overview of the menu items

Below is an overview of those menu items where you can change and save the machine parameters that are preset at the factory, and also start programs and call up information. You will find detailed information on this in the fur- ther chapters of these operating instructions.

•«CHOOSE LANGUAGE» menu Display language; several languages are available for selection.

•«WATER HARDNESS» menu Programmable hardness level ranging from 1 (soft) to 4 (very hard). Factory setting: 4 (very hard).

•«TEMPERATURE» menu Programmable coffee temperature LOW, MEDIUM or HIGH.

Factory setting: HIGH

•«AUTO SHUTOFF TIME» menu Programmable shut-off time, from

1 to 3 hours.

Factory setting: 1h (1 hour).

•«JUG PROGRAM» menu

–Programmable fill level (cup size) and quantity of ground coffee (cof- fee strength) for the cups to be filled into the jug

•«COFFEE PROGRAM» menu Adjust the fill level for each cup size (espresso cup, small cup, medium cup, large cup, mug).

•«DESCALE» menu

Start the descaling program.

•«STATISTICS» menu

Find out the number of cups of coffee dispensed, and the number of jugs pre- pared with either 4, 6, 8 or 10 cups and the total number of descalings carried out.

•«RESET TO DEFAULT» menu Reset the changed parameter settings to the factory settings.

5 Menu mode

You can switch to the Menu mode by pressing the "Menu" key. In Menu mode, you can navigate by means of the "1 cup of coffee" , "2 cups of

coffee“ , "Steam“ and "MENU“ keys. The respective function in each case is shown in the display above the key (Fig. 5):

•«<» ("1 cup of coffee" ) and

«>» ("2 cups of coffee“ ) are for "scrolling“ in the menu

•«OK» ("Steam“ ) confirms a menu item

•«ESC» ("MENU“) returns to the last level of the menu without changing settings

6Before using for the first time

6.1Setting up and connecting the coffee machine

0Place the machine on a suitable hori- zontal, stable, unheated and water- resistant surface.

1Ensure that there is good air circula- tion. After positioning the appliance on the work top, leave a space of at least 5 cm between the surfaces of the appliance and the side and rear walls and at least 20 cm above the coffee maker.

Never install the appliance in environ- ments where the temperature may reach 0°C or lower (the appliance may be damaged if the water freezes).

1Important! If the coffee machine is brought into a warm room from a cold environment, wait about two hours before switching on!

We advise you to place the coffee machine on a suitable mat to prevent damage being caused by spray and splashes.

0Plug the coffee machine into an earthed mains socket. Do not use a socket that is not earthed.

37

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Kaffee-Espresso-Vollautomat Fully Automatic Espresso Maker Page Page Page Page Page Dear Customer Contents Control panel Fig Front view with open service door FigFront view Fig Coffee and espresso General safetyChild safety Safety in operationDo not expose the coffee machine to the effects ofweather Safety in cleaning and careDo not use steam to heat inflammable liquids Spoon only ground coffee into the ground coffee fillerOverview of the menu items Menu modeBefore using for the first time Setting up and connecting the coffee machine«TURN Steam KNOB» Switching on for the first timeFilling with water Filling the coffee bean container«TURNING OFF Switching on the machineSwitching off the coffee machine Setting the water hardnessHardness level 2, medium hard up to 2.5 mmol/l, or Setting and saving the water hard- ness levelMaking coffee with beans Determining water hardnessGram Programming the fill level, If the message «GROUND TOO Fine Adjust MillGo, to the setting, and run off Running the rinsing program Making several cups of coffee with the jug functionTips for making hotter coffee «ESPRESSO CUP PRE-GROUND 1 CUP» Using pre-ground coffeeFunction. The appliance displays e.g Machine is ready for the milk frothing Frothing milkClose the lid Centage indication «40%»120 sec. for the machine to automati Cleaning the steam nozzleTurn Knob for STEAM» Preparing hot water Setting the grinding textureMenu settings Setting the language«TEMPERATURE LOW» Setting the coffee temperatureSetting the shut-off time Stages, using the scrolling keys or Fig Setting the coffee program Programming the fill levelShows the number of jugs dispensed Emptying the waste coffee container Cleaning and CareRegular cleaning Cleaning the grinderProceed as follows Cleaning the brewing unit«50%» Running the descaling programUpper line of the display shows Turn the knob for steam and hot water back to the positionWaste coffee container is full Ordering AccessoriesWhat to do if you read fol- lowing messages on the display Shows the alternating messagesCoffee runs out too slowly Coffee is not hotCoffee is not creamy enough Remove the dried coffee with a needle Fig Brewing unit cannot be removed for cleaningCoffee runs out too quickly Coffee flows out of only one of the dispensersOld appliance Technical DataDisposal Packaging materialFor Austria If service is neededFor Repairs service 0810-955 For Product service 0810-955

CG 6400 specifications

The AEG CG 6400 is a state-of-the-art built-in gas cooktop designed to elevate your culinary experience with its innovative features and outstanding performance. Engineered with precision and user-friendliness in mind, this appliance makes cooking both enjoyable and efficient.

One of the standout features of the AEG CG 6400 is its high-quality stainless steel surface, which brings a touch of elegance to any kitchen. This durable material not only looks great but is also easy to clean, ensuring that maintenance is a breeze even after preparing elaborate meals.

The cooktop boasts powerful gas burners that deliver exceptional heat control, accommodating a wide range of cooking techniques from boiling and frying to simmering. With up to five cooking zones, including a multi-ring burner for intense heat, users have the freedom to prepare multiple dishes simultaneously, enhancing their cooking efficiency.

AEG has also integrated a flame failure safety device into the CG 6400, which automatically cuts off the gas supply if the flame goes out, offering peace of mind to the cooks in the kitchen. This feature significantly enhances safety, making it particularly suitable for homes with children or pets.

The cooktop’s ergonomic control knobs are placed at the front for easy access, allowing for precise flame adjustment while monitoring your cooking safely. Another notable technology is the integrated ignition system that allows for one-handed operation—simply turn the knob, and the burner ignites instantly, eliminating the need for matches or lighters.

Another characteristic that sets the AEG CG 6400 apart is its compatibility with a variety of cookware materials, including cast iron, stainless steel, and non-stick pans, making it versatile for all types of cooking. The cooktop also features robust cast iron grates that provide a stable and secure base for pots and pans, promoting better heat distribution.

In conclusion, the AEG CG 6400 is more than just a cooktop; it is an embodiment of quality, safety, and modern cooking technology. Its elegant design, powerful burners, user-friendly controls, and safety features make it an ideal choice for both professional chefs and home cooking enthusiasts alike. Whether you are searing meats, simmering sauces, or whipping up a quick stir-fry, the AEG CG 6400 delivers efficient performance that meets the demands of today’s cooking styles.
Top Page Image Contents