AEG CG 6400 Ordering Accessories, What to do if you read fol- lowing messages on the display

Page 27
100%».
55%».
50%».

g

appliance. The upper line of the display

shows the alternating messages

«RINSING» and «TURN STEAM KNOB», whilst the lower line shows a progress bar with the percentage indi- cation

«

0Empty the container under the steam nozzle and replace it there.

0Turn the knob for steam and hot water

to the position .

A rinsing procedure with fresh water is carried out and the rinse water runs

out of the steam nozzle. The display shows «RINSING» and an advancing progress bar with a percentage indica- tion, e.g.

«

After a few minutes, the water tank will be empty and the upper line of the

display will show the alternating mes- sages «RINSING COMPLETE» and «TURN STEAM KNOB», whilst the

lower line shows a progress bar with the percentage indication

«

0Turn the knob for steam and hot water back to the position .

The display shows the alternating mes- sages «RINSING COMPLETE» and «FILL TANK».

0Empty the container with rinsing water.

0Remove water tank, fill it with fresh water and replace it.

The machine is now ready for use and its status is as for the last coffee mode selected.

3After running the descaling program, you are advised to throw away the first cup of coffee from the machine.

15 Ordering Accessories

To ensure years of satisfaction with your coffee machine and prevent faults arising, it is very important to descale the coffee machine regularly. The original descaling agent is obtaina- ble direct from us.

If you live in Germany, please call our Order Hotline:

1801 - 20 30 60*

(*Local tariff on Deutsche Telekom's landline network)

Monday to Friday 8.00 am - 6.00 pm

16What to do if you read fol- lowing messages on the display ...

«FILL TANK»

The water tank is empty or is posi- tioned incorrectly.

0Fill the water tank, as described in sec- tion „Filling with water“, page 38, and insert it fully.

The tank is dirty or encrusted with limescale.

0Rinse or descale the water tank.

«GROUND TOO FINE ADJUST MILL AND TURN STEAM KNOB»

The appliance cannot make coffee.

0Place a container under the steam noz- zle and turn the knob for steam and hot water anticlockwise to the position (Fig. 9).

The coffee runs off too slowly.

0Turn the knob for setting grinding tex- ture (Fig. 12) one click clockwise (see „Setting the grinding texture“,

page 46).

«EMPTY WASTE COFFEE CONTAINER»

The waste coffee container is full.

0Empty the waste coffee container and clean it as described in the section „Emptying the waste coffee container“, page 50, then replace it.

53

Image 27
Contents Kaffee-Espresso-Vollautomat Fully Automatic Espresso Maker Page Page Page Page Page Dear Customer Contents Front view with open service door Fig Front view FigControl panel Fig Coffee and espresso General safetyChild safety Safety in operationDo not expose the coffee machine to the effects ofweather Safety in cleaning and careDo not use steam to heat inflammable liquids Spoon only ground coffee into the ground coffee fillerOverview of the menu items Menu modeBefore using for the first time Setting up and connecting the coffee machine«TURN Steam KNOB» Switching on for the first timeFilling with water Filling the coffee bean container«TURNING OFF Switching on the machineSwitching off the coffee machine Setting the water hardnessHardness level 2, medium hard up to 2.5 mmol/l, or Setting and saving the water hard- ness levelMaking coffee with beans Determining water hardnessIf the message «GROUND TOO Fine Adjust Mill Go, to the setting, and run offGram Programming the fill level, Making several cups of coffee with the jug function Tips for making hotter coffeeRunning the rinsing program Using pre-ground coffee Function. The appliance displays e.g«ESPRESSO CUP PRE-GROUND 1 CUP» Machine is ready for the milk frothing Frothing milkClose the lid Centage indication «40%»Cleaning the steam nozzle Turn Knob for STEAM»120 sec. for the machine to automati Preparing hot water Setting the grinding textureMenu settings Setting the languageSetting the coffee temperature Setting the shut-off time«TEMPERATURE LOW» Stages, using the scrolling keys or Fig Setting the coffee program Programming the fill levelShows the number of jugs dispensed Emptying the waste coffee container Cleaning and CareRegular cleaning Cleaning the grinderProceed as follows Cleaning the brewing unit«50%» Running the descaling programUpper line of the display shows Turn the knob for steam and hot water back to the positionWaste coffee container is full Ordering AccessoriesWhat to do if you read fol- lowing messages on the display Shows the alternating messagesCoffee is not hot Coffee is not creamy enoughCoffee runs out too slowly Remove the dried coffee with a needle Fig Brewing unit cannot be removed for cleaningCoffee runs out too quickly Coffee flows out of only one of the dispensersOld appliance Technical DataDisposal Packaging materialIf service is needed For Repairs service 0810-955 For Product service 0810-955For Austria

CG 6400 specifications

The AEG CG 6400 is a state-of-the-art built-in gas cooktop designed to elevate your culinary experience with its innovative features and outstanding performance. Engineered with precision and user-friendliness in mind, this appliance makes cooking both enjoyable and efficient.

One of the standout features of the AEG CG 6400 is its high-quality stainless steel surface, which brings a touch of elegance to any kitchen. This durable material not only looks great but is also easy to clean, ensuring that maintenance is a breeze even after preparing elaborate meals.

The cooktop boasts powerful gas burners that deliver exceptional heat control, accommodating a wide range of cooking techniques from boiling and frying to simmering. With up to five cooking zones, including a multi-ring burner for intense heat, users have the freedom to prepare multiple dishes simultaneously, enhancing their cooking efficiency.

AEG has also integrated a flame failure safety device into the CG 6400, which automatically cuts off the gas supply if the flame goes out, offering peace of mind to the cooks in the kitchen. This feature significantly enhances safety, making it particularly suitable for homes with children or pets.

The cooktop’s ergonomic control knobs are placed at the front for easy access, allowing for precise flame adjustment while monitoring your cooking safely. Another notable technology is the integrated ignition system that allows for one-handed operation—simply turn the knob, and the burner ignites instantly, eliminating the need for matches or lighters.

Another characteristic that sets the AEG CG 6400 apart is its compatibility with a variety of cookware materials, including cast iron, stainless steel, and non-stick pans, making it versatile for all types of cooking. The cooktop also features robust cast iron grates that provide a stable and secure base for pots and pans, promoting better heat distribution.

In conclusion, the AEG CG 6400 is more than just a cooktop; it is an embodiment of quality, safety, and modern cooking technology. Its elegant design, powerful burners, user-friendly controls, and safety features make it an ideal choice for both professional chefs and home cooking enthusiasts alike. Whether you are searing meats, simmering sauces, or whipping up a quick stir-fry, the AEG CG 6400 delivers efficient performance that meets the demands of today’s cooking styles.