AEG CG 6400 manual Preparing hot water, Setting the grinding texture, Menu settings

Page 20

g

11 Preparing hot water

The hot water can be used to pre-heat cups and for making hot drinks, e.g. tea or instant soups.

1Caution! Danger of scalding when the hot water nozzle is activated! Hot water or steam output can cause scalding. Activate the hot water nozzle only when a container is under the hot water nozzle.

0Place a container under the hot water nozzle.

0Turn the knob for steam and hot water

to the position (Fig. 10). Hot water is dispensed; the display shows «HOT WATER».

3You should not run off hot water for more than two minutes at a time.

0After you have dispensed the hot water turn the knob for steam and hot water back to the position (Fig. 10) and remove the container.

12Setting the grinding texture

The appliance is preset to grind to a medium texture. If you find that coffee delivery is either too fast or too slow (in drips), the grinding texture can be adjusted during the grinding process.

1The grinder setting may be changed only while coffee is being ground. Making adjustments to the stationary grinder can damage the coffee machine.

0Set the grinding texture (Fig. 12) using the knob for setting the grinding tex- ture (Fig. 2, T).

•If the coffee is delivered a drop at a time or not at all, turn the knob one click clockwise.

Turn one click at a time until the coffee is delivered satisfactorily.

•If the coffee is delivered too fast and the crema is not to your tase, turn the knob one click anticlockwise.

3Avoid turning the knob for setting the grinding texture too far, otherwise when you select 2 cups, the coffee may emerge drop by drop.

3The effect of these adjustments will only be evident after at least 2 cups of coffee have been prepared.

Remove foreign objects from the grinder

Foreign objects such as small stones in the grinder can damage the grinder. A foreign objects in the coffee causes a loud, regular rattle. If you hear this noise while coffee is being ground, immediately switch off the coffee machine and call the Customer Service Centre.

13 Menu settings

13.1 Setting the language

You can choose between several lan- guages. Another language can be selected as follows:

0Press the "Menu" key (Fig. 4).

The menu item «CHOOSE LAN- GUAGE» appears.

0Confirm the menu item with the "OK" key (Fig. 5). The set language appears in the display.

0Press the scrolling keys "<" or ">" (Fig. 5) until the desired language appears.

0When the desired language is dis- played, confirm it with the "OK" key (Fig. 5). This language is now pro- grammed.

If "OK" is not pressed, after about

120 sec. the appliance returns auto- matically to the coffee mode without storing the setting.

3After programming, the display auto- matically returns to the menu item

«CHOOSE LANGUAGE».

0To return to the coffee mode, press the "Menu" key (Fig. 4) or wait about

120 sec. for the machine to return automatically to the coffee mode.

46

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Kaffee-Espresso-Vollautomat Fully Automatic Espresso Maker Page Page Page Page Page Dear Customer Contents Control panel Fig Front view with open service door FigFront view Fig General safety Child safetySafety in operation Coffee and espressoSafety in cleaning and care Do not use steam to heat inflammable liquidsSpoon only ground coffee into the ground coffee filler Do not expose the coffee machine to the effects ofweatherMenu mode Before using for the first timeSetting up and connecting the coffee machine Overview of the menu itemsSwitching on for the first time Filling with waterFilling the coffee bean container «TURN Steam KNOB»Switching on the machine Switching off the coffee machineSetting the water hardness «TURNING OFFSetting and saving the water hard- ness level Making coffee with beansDetermining water hardness Hardness level 2, medium hard up to 2.5 mmol/l, orGram Programming the fill level, If the message «GROUND TOO Fine Adjust MillGo, to the setting, and run off Running the rinsing program Making several cups of coffee with the jug functionTips for making hotter coffee «ESPRESSO CUP PRE-GROUND 1 CUP» Using pre-ground coffeeFunction. The appliance displays e.g Frothing milk Close the lidCentage indication «40%» Machine is ready for the milk frothing120 sec. for the machine to automati Cleaning the steam nozzleTurn Knob for STEAM» Setting the grinding texture Menu settingsSetting the language Preparing hot water«TEMPERATURE LOW» Setting the coffee temperatureSetting the shut-off time Setting the coffee program Programming the fill level Stages, using the scrolling keys or FigShows the number of jugs dispensed Cleaning and Care Regular cleaningCleaning the grinder Emptying the waste coffee containerCleaning the brewing unit Proceed as followsRunning the descaling program Upper line of the display showsTurn the knob for steam and hot water back to the position «50%»Ordering Accessories What to do if you read fol- lowing messages on the displayShows the alternating messages Waste coffee container is fullCoffee runs out too slowly Coffee is not hotCoffee is not creamy enough Brewing unit cannot be removed for cleaning Coffee runs out too quicklyCoffee flows out of only one of the dispensers Remove the dried coffee with a needle FigTechnical Data DisposalPackaging material Old applianceFor Austria If service is neededFor Repairs service 0810-955 For Product service 0810-955

CG 6400 specifications

The AEG CG 6400 is a state-of-the-art built-in gas cooktop designed to elevate your culinary experience with its innovative features and outstanding performance. Engineered with precision and user-friendliness in mind, this appliance makes cooking both enjoyable and efficient.

One of the standout features of the AEG CG 6400 is its high-quality stainless steel surface, which brings a touch of elegance to any kitchen. This durable material not only looks great but is also easy to clean, ensuring that maintenance is a breeze even after preparing elaborate meals.

The cooktop boasts powerful gas burners that deliver exceptional heat control, accommodating a wide range of cooking techniques from boiling and frying to simmering. With up to five cooking zones, including a multi-ring burner for intense heat, users have the freedom to prepare multiple dishes simultaneously, enhancing their cooking efficiency.

AEG has also integrated a flame failure safety device into the CG 6400, which automatically cuts off the gas supply if the flame goes out, offering peace of mind to the cooks in the kitchen. This feature significantly enhances safety, making it particularly suitable for homes with children or pets.

The cooktop’s ergonomic control knobs are placed at the front for easy access, allowing for precise flame adjustment while monitoring your cooking safely. Another notable technology is the integrated ignition system that allows for one-handed operation—simply turn the knob, and the burner ignites instantly, eliminating the need for matches or lighters.

Another characteristic that sets the AEG CG 6400 apart is its compatibility with a variety of cookware materials, including cast iron, stainless steel, and non-stick pans, making it versatile for all types of cooking. The cooktop also features robust cast iron grates that provide a stable and secure base for pots and pans, promoting better heat distribution.

In conclusion, the AEG CG 6400 is more than just a cooktop; it is an embodiment of quality, safety, and modern cooking technology. Its elegant design, powerful burners, user-friendly controls, and safety features make it an ideal choice for both professional chefs and home cooking enthusiasts alike. Whether you are searing meats, simmering sauces, or whipping up a quick stir-fry, the AEG CG 6400 delivers efficient performance that meets the demands of today’s cooking styles.
Top Page Image Contents