AEG CG 6400 manual Filling with water, Switching on for the first time, «TURN Steam KNOB»

Page 12

g

6.2Filling with water

Each time before switching on the cof- fee machine, check that there is water in the water tank, and refill if neces- sary. The coffee machine requires water for the automatic rinsing processes each time the machine is switched on or off.

0Remove the water tank from the cof- fee machine (Fig. 6). Before the tank is removed, the steam nozzle must always be positioned towards the cen- tre of the appliance, otherwise the tank cannot be removed.

0Fill the water tank with fresh cold water. Never exceed the MAX line.

3Pour only fresh cold water into the water tank. Never put in other liquids, e.g. mineral water or milk.

0Replace the water tank (Fig. 6). Press the tank firmly in, to ensure that the water tank valve opens.

3To always be sure of obtaining a rich coffee with a full aroma, you should:

–change the water in the water tank daily,

–wash the water tank at least once a week in normal washing-up water (not in the dishwasher). Then rinse with fresh water.

6.3Filling the coffee bean container

0Raise the lid of the coffee bean con- tainer, and fill the container with fresh coffee beans (Fig. 7). Then reclose the lid.

1Note! Make sure that no foreign objects, such as stones, enter the cof- fee bean container. Damage caused by foreign objects in the grinder is excluded from the guarantee.

3The grinder is factory-set to a medium grinding texture. If necessary, you can change this setting. Notes on changing the grinder setting can be found in „Setting the grinding texture“,

page 46.

1The grinder settings may be changed only whilst coffee is being ground. Making adjustments to the stationary grinder can damage the coffee machine.

3Coffee has been used to factory-test the appliance, and it is therefore com- pletely normal for there to be traces of coffee in the mill. This appliance is however guaranteed to be new.

6.4Switching on for the first time

When you operate the machine for the first time, the automatic switching on process only continues if you have selected the desired language.

0Switch on the machine with the main switch on the rear of the machine (Fig. 8).

The display shows the text «PRESS MENU TO CHOOSE ENGLISH»

successively in all available languages.

0Wait for the correct language and press the "Menu" key to confirm

(Fig. 4) and keep it pressed until the display shows: «ENGLISH INSTAL- LED».

3After using the machine for the first time you can change the language at any time; see „Setting the language“, page 46.

After programming the language, the display shows «FILL TANK !».

0Fill the water tank; see „Filling with water“, page 38.

0Replace the water tank (Fig. 6). Press the tank firmly in, to ensure that the water tank valve opens.

The display now shows:

«TURN STEAM KNOB»

0Move the steam nozzle outwards and place a cup underneath it (Fig. 9).

0Turn the knob for steam and hot water anticlockwise as far as it will go to the

position (Fig. 10).

After a few seconds, a little water runs out of the steam nozzle and the display shows a progress bar. When the cup contains about 30 ml of water, the

38

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Kaffee-Espresso-Vollautomat Fully Automatic Espresso Maker Page Page Page Page Page Dear Customer Contents Front view with open service door Fig Front view FigControl panel Fig General safety Child safetySafety in operation Coffee and espressoSafety in cleaning and care Do not use steam to heat inflammable liquidsSpoon only ground coffee into the ground coffee filler Do not expose the coffee machine to the effects ofweatherMenu mode Before using for the first timeSetting up and connecting the coffee machine Overview of the menu itemsSwitching on for the first time Filling with waterFilling the coffee bean container «TURN Steam KNOB»Switching on the machine Switching off the coffee machineSetting the water hardness «TURNING OFFSetting and saving the water hard- ness level Making coffee with beansDetermining water hardness Hardness level 2, medium hard up to 2.5 mmol/l, orIf the message «GROUND TOO Fine Adjust Mill Go, to the setting, and run offGram Programming the fill level, Making several cups of coffee with the jug function Tips for making hotter coffeeRunning the rinsing program Using pre-ground coffee Function. The appliance displays e.g«ESPRESSO CUP PRE-GROUND 1 CUP» Frothing milk Close the lidCentage indication «40%» Machine is ready for the milk frothingCleaning the steam nozzle Turn Knob for STEAM»120 sec. for the machine to automati Setting the grinding texture Menu settingsSetting the language Preparing hot waterSetting the coffee temperature Setting the shut-off time«TEMPERATURE LOW» Setting the coffee program Programming the fill level Stages, using the scrolling keys or FigShows the number of jugs dispensed Cleaning and Care Regular cleaningCleaning the grinder Emptying the waste coffee containerCleaning the brewing unit Proceed as followsRunning the descaling program Upper line of the display showsTurn the knob for steam and hot water back to the position «50%»Ordering Accessories What to do if you read fol- lowing messages on the displayShows the alternating messages Waste coffee container is fullCoffee is not hot Coffee is not creamy enoughCoffee runs out too slowly Brewing unit cannot be removed for cleaning Coffee runs out too quicklyCoffee flows out of only one of the dispensers Remove the dried coffee with a needle FigTechnical Data DisposalPackaging material Old applianceIf service is needed For Repairs service 0810-955 For Product service 0810-955For Austria

CG 6400 specifications

The AEG CG 6400 is a state-of-the-art built-in gas cooktop designed to elevate your culinary experience with its innovative features and outstanding performance. Engineered with precision and user-friendliness in mind, this appliance makes cooking both enjoyable and efficient.

One of the standout features of the AEG CG 6400 is its high-quality stainless steel surface, which brings a touch of elegance to any kitchen. This durable material not only looks great but is also easy to clean, ensuring that maintenance is a breeze even after preparing elaborate meals.

The cooktop boasts powerful gas burners that deliver exceptional heat control, accommodating a wide range of cooking techniques from boiling and frying to simmering. With up to five cooking zones, including a multi-ring burner for intense heat, users have the freedom to prepare multiple dishes simultaneously, enhancing their cooking efficiency.

AEG has also integrated a flame failure safety device into the CG 6400, which automatically cuts off the gas supply if the flame goes out, offering peace of mind to the cooks in the kitchen. This feature significantly enhances safety, making it particularly suitable for homes with children or pets.

The cooktop’s ergonomic control knobs are placed at the front for easy access, allowing for precise flame adjustment while monitoring your cooking safely. Another notable technology is the integrated ignition system that allows for one-handed operation—simply turn the knob, and the burner ignites instantly, eliminating the need for matches or lighters.

Another characteristic that sets the AEG CG 6400 apart is its compatibility with a variety of cookware materials, including cast iron, stainless steel, and non-stick pans, making it versatile for all types of cooking. The cooktop also features robust cast iron grates that provide a stable and secure base for pots and pans, promoting better heat distribution.

In conclusion, the AEG CG 6400 is more than just a cooktop; it is an embodiment of quality, safety, and modern cooking technology. Its elegant design, powerful burners, user-friendly controls, and safety features make it an ideal choice for both professional chefs and home cooking enthusiasts alike. Whether you are searing meats, simmering sauces, or whipping up a quick stir-fry, the AEG CG 6400 delivers efficient performance that meets the demands of today’s cooking styles.
Top Page Image Contents