AEG CG 6400 manual Shows the number of jugs dispensed

Page 23

g

If "OK" is not pressed, after about

120 sec. the appliance returns auto- matically to the coffee mode without storing the setting.

3After programming, the display returns automatically to the menu item for setting the fill level, e.g. «ESPRESSO CUP».

0To return to the coffee mode, press the "Menu" key (Fig. 4) twice or wait about 120 sec for the machine to return automatically to the coffee mode.

3Saving the fill level is only possible for 1 cup. Where 2 cups are to be dis- pensed, the stored values are doubled.

13.6Establishing the number of cof- fees dispensed, the number of jugs dispensed and the number of descalings (statistics)

The coffee machine has the facility to display

–the total number of cups of coffee made,

–the number of jugs prepared, con- taining 4 cups, 6 cups, 8 cups and 10 cups, as well as

–the number of descalings carried out.

3Where 2 cups of coffee are dispensed simultaneously, there are also counted as 2 cups of coffee.

0Press the "Menu" key (Fig. 4).

The menu item «CHOOSE LAN- GUAGE» appears.

0Press the scrolling keys "<" or ">" (Fig. 5) until the menu item

«STATISTICS» appears.

0Confirm the menu item with the "OK" key (Fig. 5). The display shows the

number of cups dispensed up to this time, e.g. «TOT. COFFEES 135» for 135 dispensed coffees.

0Repeatedly press the scrolling keys "<" or ">" (Fig. 5) to indicate the number of jugs dispensed for each of the sizes possible in the jug function (4 cups, 6 cups, 8 cups, 10 cups). The display

shows the number of jugs dispensed in

the respective cup size, e.g. «JUG 4 CUPS 12» where 12 jugs, each con-

taining 4 cups, have been prepared.

0Repeatedly press the scrolling key ">"

(Fig. 5) to indicate the number of des- calings carried out, e.g. «TOT. DES- CALES 5» for 5 descalings.

0To return to the coffee mode, press the "Menu" key (Fig. 4) twice or wait about 120 sec for the machine to return automatically to the coffee mode.

13.7Resetting the machine to the factory setting (reset to default)

This function is used to reset changes you have made to the factory settings.

The following settings or saved values are affected:

•water hardness

•cup fill levels

•coffee temperature

•shut-off time

0Press the "Menu" key (Fig. 4).

The menu item «CHOOSE LAN- GUAGE» appears.

0Press the scrolling key "<" or ">" (Fig. 5) until the menu item «RESET TO DEFAULT» appears.

0Confirm the menu item with the "OK" key (Fig. 5). The display shows «RESET TO DEFAULT NO».

0Press the scrolling key "<" (Fig. 5) until the display shows «RESET TO DEFAULT YES»

0Confirm the menu item with the "OK" key (Fig. 5). The machine is now reset to the factory settings.

If "OK" is not pressed, after about

120 sec. the appliance returns auto- matically to the coffee mode and the machine is not reset to the factory set- tings.

3After programming, the machine returns automatically to the coffee mode.

49

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Kaffee-Espresso-Vollautomat Fully Automatic Espresso Maker Page Page Page Page Page Dear Customer Contents Control panel Fig Front view with open service door FigFront view Fig Coffee and espresso General safetyChild safety Safety in operationDo not expose the coffee machine to the effects ofweather Safety in cleaning and careDo not use steam to heat inflammable liquids Spoon only ground coffee into the ground coffee fillerOverview of the menu items Menu modeBefore using for the first time Setting up and connecting the coffee machine«TURN Steam KNOB» Switching on for the first timeFilling with water Filling the coffee bean container«TURNING OFF Switching on the machineSwitching off the coffee machine Setting the water hardnessHardness level 2, medium hard up to 2.5 mmol/l, or Setting and saving the water hard- ness levelMaking coffee with beans Determining water hardnessGram Programming the fill level, If the message «GROUND TOO Fine Adjust MillGo, to the setting, and run off Running the rinsing program Making several cups of coffee with the jug functionTips for making hotter coffee «ESPRESSO CUP PRE-GROUND 1 CUP» Using pre-ground coffeeFunction. The appliance displays e.g Machine is ready for the milk frothing Frothing milkClose the lid Centage indication «40%»120 sec. for the machine to automati Cleaning the steam nozzleTurn Knob for STEAM» Preparing hot water Setting the grinding textureMenu settings Setting the language«TEMPERATURE LOW» Setting the coffee temperatureSetting the shut-off time Stages, using the scrolling keys or Fig Setting the coffee program Programming the fill levelShows the number of jugs dispensed Emptying the waste coffee container Cleaning and CareRegular cleaning Cleaning the grinderProceed as follows Cleaning the brewing unit«50%» Running the descaling programUpper line of the display shows Turn the knob for steam and hot water back to the positionWaste coffee container is full Ordering AccessoriesWhat to do if you read fol- lowing messages on the display Shows the alternating messagesCoffee runs out too slowly Coffee is not hotCoffee is not creamy enough Remove the dried coffee with a needle Fig Brewing unit cannot be removed for cleaningCoffee runs out too quickly Coffee flows out of only one of the dispensersOld appliance Technical DataDisposal Packaging materialFor Austria If service is neededFor Repairs service 0810-955 For Product service 0810-955

CG 6400 specifications

The AEG CG 6400 is a state-of-the-art built-in gas cooktop designed to elevate your culinary experience with its innovative features and outstanding performance. Engineered with precision and user-friendliness in mind, this appliance makes cooking both enjoyable and efficient.

One of the standout features of the AEG CG 6400 is its high-quality stainless steel surface, which brings a touch of elegance to any kitchen. This durable material not only looks great but is also easy to clean, ensuring that maintenance is a breeze even after preparing elaborate meals.

The cooktop boasts powerful gas burners that deliver exceptional heat control, accommodating a wide range of cooking techniques from boiling and frying to simmering. With up to five cooking zones, including a multi-ring burner for intense heat, users have the freedom to prepare multiple dishes simultaneously, enhancing their cooking efficiency.

AEG has also integrated a flame failure safety device into the CG 6400, which automatically cuts off the gas supply if the flame goes out, offering peace of mind to the cooks in the kitchen. This feature significantly enhances safety, making it particularly suitable for homes with children or pets.

The cooktop’s ergonomic control knobs are placed at the front for easy access, allowing for precise flame adjustment while monitoring your cooking safely. Another notable technology is the integrated ignition system that allows for one-handed operation—simply turn the knob, and the burner ignites instantly, eliminating the need for matches or lighters.

Another characteristic that sets the AEG CG 6400 apart is its compatibility with a variety of cookware materials, including cast iron, stainless steel, and non-stick pans, making it versatile for all types of cooking. The cooktop also features robust cast iron grates that provide a stable and secure base for pots and pans, promoting better heat distribution.

In conclusion, the AEG CG 6400 is more than just a cooktop; it is an embodiment of quality, safety, and modern cooking technology. Its elegant design, powerful burners, user-friendly controls, and safety features make it an ideal choice for both professional chefs and home cooking enthusiasts alike. Whether you are searing meats, simmering sauces, or whipping up a quick stir-fry, the AEG CG 6400 delivers efficient performance that meets the demands of today’s cooking styles.
Top Page Image Contents