AEG CG 6400 manual Switching on the machine, Switching off the coffee machine, «Turning Off

Page 13

g

progress bar will be complete and the display shows «TURN STEAM KNOB».

0Turn the steam knob clockwise (Fig. 10) as far as it will go, to the position , to stop the water running out.

The appliance now displays

«TURNING OFF

PLEASE WAIT...» and switches itself off.

0Fill the coffee bean container with cof- fee beans; see „Filling the coffee bean container“, page 38.

1Important: To prevent malfunction, never fill this container with ground coffee, freeze-dried coffee, caramel- ised beans or anything else that could damage the appliance.

0Press the ON/OFF key on the con- trol panel (Fig. 11).

The appliance displays «HEATING UP...» in the upper line of the display, and in the lower line a progress bar

with a percentage indication

«40%» to show how far heating has progressed.

When pre-heating is complete, the appliance displays:

«RINSING...» in the upper line of the display, and in the lower line a progress bar with a percentage

indication

«40%» and the appliance performs an automatic rinse cycle (a little hot water runs out of the dispenser and is collected in the drip tray beneath).

The appliance now shows the basic set- tings; i.e. the upper line of the display shows the cup size and the lower line shows the strength of the coffee, e.g.:

«MEDIUM CUP NORMAL TASTE»

6.5Switching on the machine

Each time before switching on, make sure there is water in the water tank and replenish if necessary. The machine requires water for the automatic rins-

ing cycles that are carried out each time the appliance is switched on or off.

0Switch the machine on with the "On/ Off" key (Fig. 11).

3Immediately after being switched on the machine runs through a set-up cycle. The noises occurring are per- fectly normal.

3During the heating-up phase (approx. 120 seconds) the display shows «HEATING UP..» in the upper line

and in the lower line a progress bar

«40%» with a percentage to show how far pre- heating has progressed.

When pre-heating is complete, the appliance displays:

«RINSING...» in the upper line of the display, and in the lower line a progress bar with a percentage indica-

tion

«40%», and the appliance performs an automatic rinse cycle (a little hot water runs out of the spouts and is collected in the drip tray beneath).

The coffee machine is now ready to use. The information shown on the dis- play depends on the last coffee mode that was selected.

6.6Switching off the coffee machine

0Switch the machine off with the "On/ Off" key (Fig. 11).

The machine carries out a rinsing cycle (display indication «RINSING PLEASE WAIT…») and turns off.

3If you will not be using the machine for a longer period of time, after switching off the "On/Off" key , you should also switch off the main switch at the back (Fig. 8).

6.7Setting the water hardness

After putting the machine into opera- tion for the first time, or when using a different water quality, you should set

39

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Kaffee-Espresso-Vollautomat Fully Automatic Espresso Maker Page Page Page Page Page Dear Customer Contents Front view Fig Front view with open service door FigControl panel Fig Child safety General safetySafety in operation Coffee and espressoDo not use steam to heat inflammable liquids Safety in cleaning and careSpoon only ground coffee into the ground coffee filler Do not expose the coffee machine to the effects ofweatherBefore using for the first time Menu modeSetting up and connecting the coffee machine Overview of the menu itemsFilling with water Switching on for the first timeFilling the coffee bean container «TURN Steam KNOB»Switching off the coffee machine Switching on the machineSetting the water hardness «TURNING OFFMaking coffee with beans Setting and saving the water hard- ness levelDetermining water hardness Hardness level 2, medium hard up to 2.5 mmol/l, orGo, to the setting, and run off If the message «GROUND TOO Fine Adjust MillGram Programming the fill level, Tips for making hotter coffee Making several cups of coffee with the jug functionRunning the rinsing program Function. The appliance displays e.g Using pre-ground coffee«ESPRESSO CUP PRE-GROUND 1 CUP» Close the lid Frothing milkCentage indication «40%» Machine is ready for the milk frothingTurn Knob for STEAM» Cleaning the steam nozzle120 sec. for the machine to automati Menu settings Setting the grinding textureSetting the language Preparing hot waterSetting the shut-off time Setting the coffee temperature«TEMPERATURE LOW» Stages, using the scrolling keys or Fig Setting the coffee program Programming the fill levelShows the number of jugs dispensed Regular cleaning Cleaning and CareCleaning the grinder Emptying the waste coffee containerProceed as follows Cleaning the brewing unitUpper line of the display shows Running the descaling programTurn the knob for steam and hot water back to the position «50%»What to do if you read fol- lowing messages on the display Ordering AccessoriesShows the alternating messages Waste coffee container is fullCoffee is not creamy enough Coffee is not hotCoffee runs out too slowly Coffee runs out too quickly Brewing unit cannot be removed for cleaningCoffee flows out of only one of the dispensers Remove the dried coffee with a needle FigDisposal Technical DataPackaging material Old applianceFor Repairs service 0810-955 For Product service 0810-955 If service is neededFor Austria

CG 6400 specifications

The AEG CG 6400 is a state-of-the-art built-in gas cooktop designed to elevate your culinary experience with its innovative features and outstanding performance. Engineered with precision and user-friendliness in mind, this appliance makes cooking both enjoyable and efficient.

One of the standout features of the AEG CG 6400 is its high-quality stainless steel surface, which brings a touch of elegance to any kitchen. This durable material not only looks great but is also easy to clean, ensuring that maintenance is a breeze even after preparing elaborate meals.

The cooktop boasts powerful gas burners that deliver exceptional heat control, accommodating a wide range of cooking techniques from boiling and frying to simmering. With up to five cooking zones, including a multi-ring burner for intense heat, users have the freedom to prepare multiple dishes simultaneously, enhancing their cooking efficiency.

AEG has also integrated a flame failure safety device into the CG 6400, which automatically cuts off the gas supply if the flame goes out, offering peace of mind to the cooks in the kitchen. This feature significantly enhances safety, making it particularly suitable for homes with children or pets.

The cooktop’s ergonomic control knobs are placed at the front for easy access, allowing for precise flame adjustment while monitoring your cooking safely. Another notable technology is the integrated ignition system that allows for one-handed operation—simply turn the knob, and the burner ignites instantly, eliminating the need for matches or lighters.

Another characteristic that sets the AEG CG 6400 apart is its compatibility with a variety of cookware materials, including cast iron, stainless steel, and non-stick pans, making it versatile for all types of cooking. The cooktop also features robust cast iron grates that provide a stable and secure base for pots and pans, promoting better heat distribution.

In conclusion, the AEG CG 6400 is more than just a cooktop; it is an embodiment of quality, safety, and modern cooking technology. Its elegant design, powerful burners, user-friendly controls, and safety features make it an ideal choice for both professional chefs and home cooking enthusiasts alike. Whether you are searing meats, simmering sauces, or whipping up a quick stir-fry, the AEG CG 6400 delivers efficient performance that meets the demands of today’s cooking styles.
Top Page Image Contents