AEG CG 6400 Making several cups of coffee with the jug function, Tips for making hotter coffee

Page 16

g

water from the steam nozzle for a few seconds.

3When using the appliance for the first time, at least 4-5 cups of coffee need to be made before the appliance starts to yield satisfactory results.

7.1Tips for making hotter coffee

•When you turn the appliance on, if you want to make a short coffee (less than 60 ml), use the hot rinse- through water to preheat the cups.

•Set a higher coffee temperature in the corresponding menu; see „Set- ting the coffee temperature“, page 47.

•If you have not dispensed coffee for a long period of time with the machine switched on, you should rinse the system before dispensing again, to pre-heat the brewing unit. Select the rinsing function in the corresponding menu (see „Running the rinsing program“, page 42). Run off the water into the underlying drip tray, or alternatively use this water to fill (and then empty) the cup to be used for the coffee, so as to pre-heat the cup.

•Unless they have been pre-heated, do not use cups that are too thick, as they will absorb too much heat.

•Use cups that have been pre-heated by rinsing them with hot water or by leaving them for at least 20 minutes on the heated cup rack (H) with the coffee machine on.

7.2Running the rinsing program

The rinsing program allows the brew- ing unit and dispenser to be heated up.

The rinsing process takes only few seconds.

0Press the "Menu" key (Fig. 4). The menu item «CHOOSE LANGUAGE» appears.

0Press the scrolling keys "<" or ">"

(Fig. 5) until the menu item «RINSING» appears.

0Confirm the menu item with the "OK"

key (Fig. 5). The display shows

«RINSING», and an advancing progress bar with a percentage indica-

tion «

40%».

After rinsing, the machine returns automatically to the coffee mode.

8Making several cups of coffee with the jug function

This function allows you to make sev- eral cups of coffee completely auto- matically, which are poured into the stainless steel thermos jug that is supplied: Grinding, portioning, press- ing, pre-brewing, brewing and ejection of the coffee grounds are as described in the previous section.

The appliance is preset to make coffee of normal strength and in a medium cup size. You can also set your pre- ferred cup size and strength as described in the section „Setting the jug program (coffee strength and fill level for jug function)“, page 47.

0Turn the lid of the stainless steel ther- mos jug to the position for removal (Fig. 17), and take the lid off the jug. Rinse both the lid and the thermos jug.

0Place the thermos jug under the coffee dispenser (D), with the lid in position for pouring (fig 18). The dispenser must be slid up fully to allow the jug to be pushed in.

The display shows continuosly «FILL BEAN CONT. AND WATER TANK, EMPTY WASTE CONT., PRESS OK» to remind you of the basic operations that are necessary in order to allow the preparation of a series of coffees for the jug.

0After having checked that the water tank is full, the bean container has enough coffee beans, and the waste coffee container is empty, press the "OK" key (Fig. 5).

42

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Kaffee-Espresso-Vollautomat Fully Automatic Espresso Maker Page Page Page Page Page Dear Customer Contents Front view Fig Front view with open service door FigControl panel Fig General safety Child safetySafety in operation Coffee and espressoSafety in cleaning and care Do not use steam to heat inflammable liquidsSpoon only ground coffee into the ground coffee filler Do not expose the coffee machine to the effects ofweatherMenu mode Before using for the first timeSetting up and connecting the coffee machine Overview of the menu itemsSwitching on for the first time Filling with waterFilling the coffee bean container «TURN Steam KNOB»Switching on the machine Switching off the coffee machineSetting the water hardness «TURNING OFFSetting and saving the water hard- ness level Making coffee with beansDetermining water hardness Hardness level 2, medium hard up to 2.5 mmol/l, orGo, to the setting, and run off If the message «GROUND TOO Fine Adjust MillGram Programming the fill level, Tips for making hotter coffee Making several cups of coffee with the jug functionRunning the rinsing program Function. The appliance displays e.g Using pre-ground coffee«ESPRESSO CUP PRE-GROUND 1 CUP» Frothing milk Close the lidCentage indication «40%» Machine is ready for the milk frothingTurn Knob for STEAM» Cleaning the steam nozzle120 sec. for the machine to automati Setting the grinding texture Menu settingsSetting the language Preparing hot waterSetting the shut-off time Setting the coffee temperature«TEMPERATURE LOW» Setting the coffee program Programming the fill level Stages, using the scrolling keys or FigShows the number of jugs dispensed Cleaning and Care Regular cleaningCleaning the grinder Emptying the waste coffee containerCleaning the brewing unit Proceed as followsRunning the descaling program Upper line of the display showsTurn the knob for steam and hot water back to the position «50%»Ordering Accessories What to do if you read fol- lowing messages on the displayShows the alternating messages Waste coffee container is fullCoffee is not creamy enough Coffee is not hotCoffee runs out too slowly Brewing unit cannot be removed for cleaning Coffee runs out too quicklyCoffee flows out of only one of the dispensers Remove the dried coffee with a needle FigTechnical Data DisposalPackaging material Old applianceFor Repairs service 0810-955 For Product service 0810-955 If service is neededFor Austria

CG 6400 specifications

The AEG CG 6400 is a state-of-the-art built-in gas cooktop designed to elevate your culinary experience with its innovative features and outstanding performance. Engineered with precision and user-friendliness in mind, this appliance makes cooking both enjoyable and efficient.

One of the standout features of the AEG CG 6400 is its high-quality stainless steel surface, which brings a touch of elegance to any kitchen. This durable material not only looks great but is also easy to clean, ensuring that maintenance is a breeze even after preparing elaborate meals.

The cooktop boasts powerful gas burners that deliver exceptional heat control, accommodating a wide range of cooking techniques from boiling and frying to simmering. With up to five cooking zones, including a multi-ring burner for intense heat, users have the freedom to prepare multiple dishes simultaneously, enhancing their cooking efficiency.

AEG has also integrated a flame failure safety device into the CG 6400, which automatically cuts off the gas supply if the flame goes out, offering peace of mind to the cooks in the kitchen. This feature significantly enhances safety, making it particularly suitable for homes with children or pets.

The cooktop’s ergonomic control knobs are placed at the front for easy access, allowing for precise flame adjustment while monitoring your cooking safely. Another notable technology is the integrated ignition system that allows for one-handed operation—simply turn the knob, and the burner ignites instantly, eliminating the need for matches or lighters.

Another characteristic that sets the AEG CG 6400 apart is its compatibility with a variety of cookware materials, including cast iron, stainless steel, and non-stick pans, making it versatile for all types of cooking. The cooktop also features robust cast iron grates that provide a stable and secure base for pots and pans, promoting better heat distribution.

In conclusion, the AEG CG 6400 is more than just a cooktop; it is an embodiment of quality, safety, and modern cooking technology. Its elegant design, powerful burners, user-friendly controls, and safety features make it an ideal choice for both professional chefs and home cooking enthusiasts alike. Whether you are searing meats, simmering sauces, or whipping up a quick stir-fry, the AEG CG 6400 delivers efficient performance that meets the demands of today’s cooking styles.
Top Page Image Contents