AEG 45003 user manual Adjusting the rinse aid dosage

Page 10

10Use of rinse aid

1. Press the release button (A) to open the rinse aid dispenser.

2.Fill the rinse aid dispenser with rinse aid. The mark 'max.' shows the maximum level.

3.Remove the spilled rinse aid with an ab-

sorbent cloth to prevent too much foam during the subsequent washing pro- gramme.

4. Close the rinse aid dispenser.

Adjusting the rinse aid dosage

The rinse aid is set at the factory at position 4.

You can set the rinse aid dosage between position 1 (lowest dosage) and position 6 (highest dosage).

Turn the rinse aid dial to increase or decrease the dosage.

– Increase the dosage if there are water droplets or limescale on the dishes.

–Decrease the dosage if there are streaks, whitish stains or bluish layers on the dishes.

Image 10

Contents Favorit Contents Child safety Safety InformationGeneral safety Correct useProduct Description InstallationProduct description Control Panel Multitab button Delay start buttonProgramme knob Start buttonUSE of the Appliance Setting the Water SoftenerSetting mode Function buttonsAppliance must be switched off Manual adjustmentElectronic adjustment You must set the water softener manually and electronicallyUSE of Dishwasher Salt USE of Rinse AIDAdjusting the rinse aid dosage Helpful hints and tips Loading Cutlery and DishesLower basket Cutlery basket Loading cutlery and dishesUpper basket Adjustment of the height of the upper basket Maximum height of the dishes Upper basket Lower basketUSE of Detergent Use of detergentMultitab Function Multitab functionWashing programmes Washing programmes Appliance must be switched offWashing Programmes Degree of soil Type of loadSelect and start a washing programme Select and Start a Washing ProgrammeConsumption values Cancelling a delay start Cancelling a washing programmeSetting and starting a washing programme with delay start Interrupting a washing programmeCleaning the filters Care and CleaningStandby mode Removing the loadWhat to do IF… External cleaningFrost precautions Appliance does not start or stops during operationPossible cause and solution Fault code and malfunctionWhat to do if… Technical data Product number Serial number Technical DataInstallation Cleaning results are not satisfactoryInstallation Adjusting the level of the applianceDo these steps to remove the appliance worktop Water drain hose Water ConnectionWater inlet hose Water connectionAppliance Electrical ConnectionEnvironment Concerns Diameter of the hosePage 117942480 a