26Electrical connection
2.Connect the water drain hose to a stand pipe with
ameter 4 cm). |
|
|
Make sure that the drain hose is not bent or |
|
|
squashed to prevent that the water drains does | max 85 cm | |
not drain correctly. |
|
|
Remove the sink plug when the appliance drains | cm |
|
the water to prevent that the water goes back into | min 40 cm | |
the appliance. | 400 |
|
max |
| |
A drain hose extension must not be longer than 2 |
| |
m. The internal diameter must not be smaller than |
|
|
the diameter of the hose. |
|
|
If you connect the water drain hose to a trap spi- got under the sink, remove the plastic membrane
(A). If you do not remove the membrane, remain- ing food can cause a blockage in the drain hose spigot
The appliance has a security feature to prevent that dirty water goes back into the appliance. If, the spigot of the sink has a
CAUTION!
Make sure that the water couplings are tight to prevent water
ELECTRICAL CONNECTION
WARNING!
The manufacturer is not responsible if you do not follow these safety precautions. This appliance needs to be earthed according to safety precautions.
Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply.
Always use a correctly installed shockproof socket.
Do not use
Make sure that the mains plug is accessible after installation.
Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
ENVIRONMENT CONCERNS
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment