AEG 45003 user manual Adjustment of the height of the upper basket

Page 14

14Loading cutlery and dishes

For glasses with long stems, turn the glass holder to the left or to the right.

You can fold up or down the row of prongs on the left side of the upper basket to in- crease load flexibility.

Adjustment of the height of the upper basket

You can put the upper basket in two positions to increase load flexibility.

Maximum height of the dishes in:

 

the upper basket

 

the lower basket

 

 

 

 

Upper position

22 cm

 

30 cm

Lower position

24 cm

 

29 cm

 

 

 

 

Do these steps to move to the upper basket to the lower/upper position:

1.Pull out the upper basket until it stops.

2.Hold the upper basket by the handle, lift it

as far as possible and lower it vertically.

The upper basket latches into the lower or the upper position.

Image 14
Contents Favorit Contents Child safety Safety InformationGeneral safety Correct useProduct description InstallationProduct Description Control Panel Multitab button Delay start buttonProgramme knob Start buttonUSE of the Appliance Setting the Water SoftenerSetting mode Function buttonsAppliance must be switched off Manual adjustmentElectronic adjustment You must set the water softener manually and electronicallyUSE of Dishwasher Salt USE of Rinse AIDAdjusting the rinse aid dosage Lower basket Loading Cutlery and DishesHelpful hints and tips Cutlery basket Loading cutlery and dishesUpper basket Adjustment of the height of the upper basket Maximum height of the dishes Upper basket Lower basketUSE of Detergent Use of detergentMultitab Function Multitab functionWashing programmes Washing programmes Appliance must be switched offWashing Programmes Degree of soil Type of loadConsumption values Select and Start a Washing ProgrammeSelect and start a washing programme Cancelling a delay start Cancelling a washing programmeSetting and starting a washing programme with delay start Interrupting a washing programmeCleaning the filters Care and CleaningStandby mode Removing the loadWhat to do IF… External cleaningFrost precautions Appliance does not start or stops during operationWhat to do if… Fault code and malfunctionPossible cause and solution Technical data Product number Serial number Technical DataInstallation Cleaning results are not satisfactoryDo these steps to remove the appliance worktop Adjusting the level of the applianceInstallation Water drain hose Water ConnectionWater inlet hose Water connectionAppliance Electrical ConnectionEnvironment Concerns Diameter of the hosePage 117942480 a