AEG 45003 USE of the Appliance, Setting the Water Softener, Function buttons, Setting mode

Page 7

Use of the appliance

7

 

 

•Programme duration.

•Remaining time to the end of the programme.

•End of a washing programme, the digital display shows a zero.

•Number of hours in delay start.

•Fault codes.

Function buttons

Use the function buttons for these operations:

•To set the water softener. Refer to the chapter 'Setting the water softener'.

•To cancel the washing programme in progress or a delay start in progress. Refer to the chapter 'Setting and starting a washing programme'.

•To deactivate/activate the rinse aid dispenser, when multitab function is active. Refer to the chapter 'Multitab function'.

Setting mode

The appliance is in setting mode when:

•One or more phase indicator lights are on.

•The time duration of the programme flashes in the digital display. The appliance must be in setting mode for these operations:

– To set a washing programme.

– To set the water softener level.

– To deactivate/activate the rinse aid dispenser. The appliance is not in setting mode when:

•One or more phase indicator lights are on.

•The time duration of the programme does not flash.

In this condition cancel the programme to go back to the setting mode. Refer to the chapter 'Setting and starting a washing programme'.

USE OF THE APPLIANCE

Refer to the following instructions for each step of procedure:

1.Make a check if the water softener level is correct for the water hardness in your area. If necessary set the water softener.

2.Fill the salt container with dishwasher salt.

3.Fill the rinse aid dispenser with rinse aid.

4.Load cutlery and dishes into the dishwasher.

5.Set the correct washing programme for the type of load and soil.

6.Fill the detergent dispenser with the correct quantity of detergent.

7.Start the washing programme.

If you use combi detergent tablets ('3 in 1', '4 in 1', '5 in 1', etc.), refer to the chapter 'Multitab function'.

SETTING THE WATER SOFTENER

The water softener removes minerals and salts from the water supply. Minerals and salts can have bad effect on the operation of the appliance.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Favorit Contents Correct use Safety InformationGeneral safety Child safetyProduct Description InstallationProduct description Control Panel Start button Delay start buttonProgramme knob Multitab buttonFunction buttons Setting the Water SoftenerSetting mode USE of the ApplianceYou must set the water softener manually and electronically Manual adjustmentElectronic adjustment Appliance must be switched offUSE of Rinse AID USE of Dishwasher SaltAdjusting the rinse aid dosage Helpful hints and tips Loading Cutlery and DishesLower basket Loading cutlery and dishes Cutlery basketUpper basket Maximum height of the dishes Upper basket Lower basket Adjustment of the height of the upper basketUse of detergent USE of DetergentMultitab function Multitab FunctionDegree of soil Type of load Washing programmes Appliance must be switched offWashing Programmes Washing programmesSelect and start a washing programme Select and Start a Washing ProgrammeConsumption values Interrupting a washing programme Cancelling a washing programmeSetting and starting a washing programme with delay start Cancelling a delay startRemoving the load Care and CleaningStandby mode Cleaning the filtersAppliance does not start or stops during operation External cleaningFrost precautions What to do IF…Possible cause and solution Fault code and malfunctionWhat to do if… Cleaning results are not satisfactory Technical DataInstallation Technical data Product number Serial numberInstallation Adjusting the level of the applianceDo these steps to remove the appliance worktop Water connection Water ConnectionWater inlet hose Water drain hoseDiameter of the hose Electrical ConnectionEnvironment Concerns AppliancePage 117942480 a
Top Page Image Contents