AEG 45003 user manual Product Description, Installation, Product description

Page 4

4Product description

Installation

•Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier.

•Remove all packaging before first use.

•A qualified and competent person must do the electrical installation.

•A qualified and competent person must do the plumbing installation.

•Do not change the specifications or modify this product. Risk of injury and damage to the appliance.

•Do not use the appliance:

–if the mains cable or water hoses are damaged,

–if the control panel, worktop or plinth area are damaged, that you can get access to

the inner side of the appliance. Contact your local Service Force Centre.

•Do not drill into the sides of the appliance to prevent damage to hydraulic and electrical components.

WARNING!

Carefully obey the instructions for electrical and water connections.

PRODUCT DESCRIPTION

Image 4

Contents Favorit Contents Safety Information General safetyChild safety Correct useProduct Description InstallationProduct description Control Panel Delay start button Programme knobMultitab button Start buttonSetting the Water Softener Setting modeUSE of the Appliance Function buttonsManual adjustment Electronic adjustmentAppliance must be switched off You must set the water softener manually and electronicallyUSE of Dishwasher Salt USE of Rinse AIDAdjusting the rinse aid dosage Helpful hints and tips Loading Cutlery and DishesLower basket Cutlery basket Loading cutlery and dishesUpper basket Adjustment of the height of the upper basket Maximum height of the dishes Upper basket Lower basketUSE of Detergent Use of detergentMultitab Function Multitab functionWashing programmes Appliance must be switched off Washing ProgrammesWashing programmes Degree of soil Type of loadSelect and start a washing programme Select and Start a Washing ProgrammeConsumption values Cancelling a washing programme Setting and starting a washing programme with delay startCancelling a delay start Interrupting a washing programmeCare and Cleaning Standby modeCleaning the filters Removing the loadExternal cleaning Frost precautionsWhat to do IF… Appliance does not start or stops during operationPossible cause and solution Fault code and malfunctionWhat to do if… Technical Data InstallationTechnical data Product number Serial number Cleaning results are not satisfactoryInstallation Adjusting the level of the applianceDo these steps to remove the appliance worktop Water Connection Water inlet hoseWater drain hose Water connectionElectrical Connection Environment ConcernsAppliance Diameter of the hosePage 117942480 a