AEG 45003 user manual Care and Cleaning, Standby mode, Removing the load, Cleaning the filters

Page 20

20Care and cleaning

Standby mode

If you do not switch off the appliance at the end of the washing programme, the appliance automatically goes into standby mode. The standby mode decreases energy consumption. Three minutes after the end of the programme, all indicator lights go off and the digital display shows one horizontal bar.

Press a button to go back to the end-of-programme mode.

Removing the load

•First remove items from the lower basket, then from the upper basket.

•There can be water on the sides and door of the appliance. Stainless steel becomes cool more quickly than the dishes.

CARE AND CLEANING

WARNING!

Switch the appliance off before you clean the filters.

Cleaning the filters

CAUTION!

Do not use the appliance without the filters. Make sure that the installation of the filters is correct. Incorrect installation will cause unsatisfactory washing results and damage to the appliance.

If necessary, clean the filters. Dirty filters decrease the washing results.

The dishwasher has three filters:

1.coarse filter (A)

2.microfilter (B)

	3.	flat filter (C)
	Do these steps to clean the filters:		A
	1.	Open the door.	A
	1.	Open the door.
	2.	Remove the lower basket.
			B
			C

Image 20

Contents Favorit Contents Safety Information General safetyChild safety Correct useProduct description InstallationProduct Description Control Panel Delay start button Programme knobMultitab button Start buttonSetting the Water Softener Setting modeUSE of the Appliance Function buttonsManual adjustment Electronic adjustmentAppliance must be switched off You must set the water softener manually and electronicallyUSE of Dishwasher Salt USE of Rinse AIDAdjusting the rinse aid dosage Lower basket Loading Cutlery and DishesHelpful hints and tips Cutlery basket Loading cutlery and dishesUpper basket Adjustment of the height of the upper basket Maximum height of the dishes Upper basket Lower basketUSE of Detergent Use of detergentMultitab Function Multitab functionWashing programmes Appliance must be switched off Washing ProgrammesWashing programmes Degree of soil Type of loadConsumption values Select and Start a Washing ProgrammeSelect and start a washing programme Cancelling a washing programme Setting and starting a washing programme with delay startCancelling a delay start Interrupting a washing programmeCare and Cleaning Standby modeCleaning the filters Removing the loadExternal cleaning Frost precautionsWhat to do IF… Appliance does not start or stops during operationWhat to do if… Fault code and malfunctionPossible cause and solution Technical Data InstallationTechnical data Product number Serial number Cleaning results are not satisfactoryDo these steps to remove the appliance worktop Adjusting the level of the applianceInstallation Water Connection Water inlet hoseWater drain hose Water connectionElectrical Connection Environment ConcernsAppliance Diameter of the hosePage 117942480 a