AEG 45003 Programme knob, Multitab button, Delay start button, Start button, Digital display

Page 6

6Control panel

Indicator lights

Wash phase

Dry phase

Multitab

Salt 1)

Rinse aid 1)

Comes on when the washing phase or the rinsing phase operates.

Comes on when the drying phase operates.

Comes on when you activate the multitab function Refer to 'Multitab function'.

Comes on when it is necessary to fill the salt container. Refer to 'Use of dishwasher salt'.

After you fill the container, the salt indicator light can continue to stay on for some hours. This does not have an unwanted effect on the operation of the appliance.

Comes on when it is necessary to fill the rinse aid container. Refer to 'Use of rinse aid'.

1)When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme operates.

Programme knob

•To switch on the appliance or to set a washing programme, turn the programme knob clockwise or counterclockwise. The programme marker on the programme knob must agree with one of the washing programmes on the control panel. If the programme marker agrees with a washing programme, the digital display shows the time duration of the programme. If the programme marker does not agree with a washing programme, the digital display shows two horizontal bars.

•To switch off the appliance, turn the programme knob until the programme marker agrees with the off indicator.

Use the programme knob for these operations:

–To set the water softener. Refer to 'Setting the water softener'.

–To deactivate/activate the rinse aid dispenser. Refer to 'Multitab function'.

Multitab button

Press this button to activate/deactivate the multitab function. Refer to the chapter 'Multitab function'.

Delay start button

Use the delay start button to delay the start of the washing programme with an interval between 1 and 19 hours. Refer to the chapter 'Setting and starting a washing programme'.

Start button

Use this button to start the washing programme. Refer to the chapter 'Setting and starting a washing programme'.

Digital display

The display shows:

•Adjusted level of the water softener.

•Activation/deactivation of the rinse aid dispenser (only with multitab function on).

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Favorit Contents Child safety Safety InformationGeneral safety Correct useInstallation Product DescriptionProduct description Control Panel Multitab button Delay start buttonProgramme knob Start buttonUSE of the Appliance Setting the Water SoftenerSetting mode Function buttonsAppliance must be switched off Manual adjustmentElectronic adjustment You must set the water softener manually and electronicallyUSE of Dishwasher Salt USE of Rinse AIDAdjusting the rinse aid dosage Loading Cutlery and Dishes Helpful hints and tipsLower basket Cutlery basket Loading cutlery and dishesUpper basket Adjustment of the height of the upper basket Maximum height of the dishes Upper basket Lower basketUSE of Detergent Use of detergentMultitab Function Multitab functionWashing programmes Washing programmes Appliance must be switched offWashing Programmes Degree of soil Type of loadSelect and Start a Washing Programme Select and start a washing programmeConsumption values Cancelling a delay start Cancelling a washing programmeSetting and starting a washing programme with delay start Interrupting a washing programmeCleaning the filters Care and CleaningStandby mode Removing the loadWhat to do IF… External cleaningFrost precautions Appliance does not start or stops during operationFault code and malfunction Possible cause and solutionWhat to do if… Technical data Product number Serial number Technical DataInstallation Cleaning results are not satisfactoryAdjusting the level of the appliance InstallationDo these steps to remove the appliance worktop Water drain hose Water ConnectionWater inlet hose Water connectionAppliance Electrical ConnectionEnvironment Concerns Diameter of the hosePage 117942480 a
Top Page Image Contents