AEG 45003 user manual What to do if…, Fault code and malfunction, Possible cause and solution

Page 22

22What to do if…

If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, contact the Service Force Centre.

CAUTION!

Switch off the appliance before you do the below suggested corrective actions.

Fault code and malfunction

•the digital display shows The dishwasher does not fill with water

•the digital display shows The dishwasher will not drain

•the digital display shows The anti-flood device operates

The programme does not start

Possible cause and solution

•The water tap is blocked or furred with limescale. Clean the water tap.

•The water tap is closed. Open the water tap.

•The filter in the water inlet hose is blocked. Clean the filter.

•The connection of the water inlet hose is not correct. The hose can be kinked or squashed.

Make sure that the connection is correct.

•There is a blockage in the sink spigot. Clean the sink spigot.

•The connection of the water drain hose is not correct. The hose can be kinked or squashed.

Make sure that the connection is correct.

•Close the water tap and contact your local Service Force Centre.

•The appliance door is not closed. Close the door.

•Mains plug is not connected in. Put in the mains.

•The fuse has blown out in the household fuse box. Replace the fuse.

•Delay start is set.

Cancel the delay start to start the programme immedi- ately.

After the check, switch on the appliance. Set the knob on the same washing programme as before the malfunction.

The programme continues from the point of interruption. If the malfunction shows again, contact your Service Force Centre.

If the display shows a fault code, not described in the chart, contact your Service Force Centre.

These data are necessary to help you quickly and correctly:

•Model (Mod.)

•Product number (PNC)

•Serial number (S.N.)

For these data, refer to the rating plate.

Write the necessary data here:

Model description : ..........

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Favorit Contents Child safety Safety InformationGeneral safety Correct useProduct Description InstallationProduct description Control Panel Multitab button Delay start buttonProgramme knob Start buttonUSE of the Appliance Setting the Water SoftenerSetting mode Function buttonsAppliance must be switched off Manual adjustmentElectronic adjustment You must set the water softener manually and electronicallyUSE of Dishwasher Salt USE of Rinse AIDAdjusting the rinse aid dosage Helpful hints and tips Loading Cutlery and DishesLower basket Cutlery basket Loading cutlery and dishesUpper basket Adjustment of the height of the upper basket Maximum height of the dishes Upper basket Lower basketUSE of Detergent Use of detergentMultitab Function Multitab functionWashing programmes Washing programmes Appliance must be switched offWashing Programmes Degree of soil Type of loadSelect and start a washing programme Select and Start a Washing ProgrammeConsumption values Cancelling a delay start Cancelling a washing programmeSetting and starting a washing programme with delay start Interrupting a washing programmeCleaning the filters Care and CleaningStandby mode Removing the loadWhat to do IF… External cleaningFrost precautions Appliance does not start or stops during operationPossible cause and solution Fault code and malfunctionWhat to do if… Technical data Product number Serial number Technical DataInstallation Cleaning results are not satisfactoryInstallation Adjusting the level of the applianceDo these steps to remove the appliance worktop Water drain hose Water ConnectionWater inlet hose Water connectionAppliance Electrical ConnectionEnvironment Concerns Diameter of the hosePage 117942480 a
Top Page Image Contents