AEG 45003 user manual Multitab Function, Multitab function

Page 16

16Multitab function

4. If you use detergent tablets, put the de- tergent tablet in the detergent dispenser

(A).

5. Close the lid of the detergent dispenser. Press the lid until it locks into position.

Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning results during short washing programmes. Use long washing pro- grammes when you use detergent tablets to fully remove the detergent.

MULTITAB FUNCTION

The multitab function is for combi detergent tablets.

These tablets contain agents such as detergent, rinse aid and dishwasher salt. Some types of tablets can contain other agents.

Do a check if these tablets are applicable for the local water hardness. Refer to the in- structions from the manufacturer.

When you set the multitab function, it stays on until you deactivate it.

The multitab function stops automatically the flow of rinse aid and salt. The rinse aid indicator light and salt indicator light are deactivated.

The programme duration can increase if you use the multitab function.

Activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the multitab function when the programme operates. Cancel the washing programme, then set the programme again.

To activate the multitab function:

•Press the multitab button. The multitab indicator light comes on. To deactivate the multitab function:

•Press the multitab button. The multitab indicator light goes off.

Do these steps if the drying results are not satisfactory:

1.Fill the rinse aid dispenser with rinse aid.

2.Activate the rinse aid dispenser.

3.Set the rinse aid dosage to position 2.

•You can only activate or deactivate the rinse aid dispenser when the multitab function is activated.

To activate/deactivate the rinse aid dispenser:

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Favorit Contents Safety Information General safetyChild safety Correct useProduct Description InstallationProduct description Control Panel Delay start button Programme knobMultitab button Start buttonSetting the Water Softener Setting modeUSE of the Appliance Function buttonsManual adjustment Electronic adjustmentAppliance must be switched off You must set the water softener manually and electronicallyUSE of Dishwasher Salt USE of Rinse AIDAdjusting the rinse aid dosage Helpful hints and tips Loading Cutlery and DishesLower basket Cutlery basket Loading cutlery and dishesUpper basket Adjustment of the height of the upper basket Maximum height of the dishes Upper basket Lower basketUSE of Detergent Use of detergentMultitab Function Multitab functionWashing programmes Appliance must be switched off Washing ProgrammesWashing programmes Degree of soil Type of loadSelect and start a washing programme Select and Start a Washing ProgrammeConsumption values Cancelling a washing programme Setting and starting a washing programme with delay startCancelling a delay start Interrupting a washing programmeCare and Cleaning Standby modeCleaning the filters Removing the loadExternal cleaning Frost precautionsWhat to do IF… Appliance does not start or stops during operationPossible cause and solution Fault code and malfunctionWhat to do if… Technical Data InstallationTechnical data Product number Serial number Cleaning results are not satisfactoryInstallation Adjusting the level of the applianceDo these steps to remove the appliance worktop Water Connection Water inlet hoseWater drain hose Water connectionElectrical Connection Environment ConcernsAppliance Diameter of the hosePage 117942480 a
Top Page Image Contents