When this has been done, all that is required is to periodically top up the container with salt. You are reminded of this by the salt container indicator light on the control panel which comes on when the salt has run out.
The salt indicator light on the control panel can remain illuminated for
Rinse aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
Filling with rinse aid
1.Open the container by turning the lid (A) anticlockwise.
2.Add the rinse aid until the container is completely full.
The indicator (B) will be completely dark.
3.Top up the rinse aid when the rinse aid indicator light on the control panel illuminates.
BR01 |
If rinse aid refilling is necessary, the rinse aid |
|
indicator light will illuminate only in setting |
|
mode and at the end of the washing |
|
programme. During the run of the programme it |
|
will remain off. |
|
Ensure that the lid is closed after every refill. |
|
Do not put liquid detergent in the rinse aid | BR03 |
compartment. Clean up any rinse aid spilt during |
|
filling with an absorbent cloth to avoid excess foaming during the next wash.
It is possible to deactivate the rinse aid indicator light (see following
instructions).
By default the rinse aid indicator light is active
13