AEG 54710 operating instructions Wash results are not satisfactory, Dishes are not clean

Page 30

Malfunction		Possible cause

		The plug is not properly
....the programme does not		inserted in the power
start		socket.


		There is no current at the
		socket.

		The door is not properly
		closed.

		Dishes are rattling against
....the machine is noisy		each other.
....the machine is noisy		The spray arms are
		The spray arms are
		knocking against the
		dishes.


....the door is difficult to		The dishwasher is not level
close		or not properly built-in.

Remedy

Insert the plug.

Close the door.

Load correctly crockery, cutlery. pots and pans. Refer to Loading cutlery and dishes.

Refer to Installation instructions.

30

...the wash results are not satisfactory

Visible lime deposits or white film on the dishes

●Check that the right level of the water softener is setted.

●Check that there is salt.

The dishes are not quite dry

●The rinse aid has run out or too little is being used.

The dishes are not clean

●The baskets are too full.

●The dishes have not been arranged properly.

●The spray arms do not rotate because incorrect loading of the baskets.

●The filters are clogged.

●The filters are not in the correct position.

●Not enough detergent has been used or it is unsuitable.

●The detergent is old or has gone hard.

●The salt container cap is not properly closed.

●The washing programme is too gentle.

Image 30

Contents Favorit Dear customer Contents Safety instructions Using your dishwasher for its intended purposeYour dishwasher in day-to-day use Disposing of packaging and old machine Disposing of the packagingDisposing of your old machine Economical and ecological dishwashing Levelling spacers Description of the applianceInside of the appliance Upper basket stop WorktopIndicator lights Door handle On/Off indicator light On/Off push buttonBefore using your dishwasher for the first time Setting the water hardness rangeOnce, level 4 is selected Filling with special salt To fillOnly use salt specifically designed for use in dishwashers Compartment. Clean up any rinse aid spilt during Rinse aidFilling with rinse aid Programme indicator light starts to flash Adjusting the dose Loading cutlery and dishes Lower basket To lower the prongsCutlery basket Adjusting the height of the upper basket Upper basketTo move to the higher position proceed as follows If using powder detergents proceed as follows Use of detergentCompact detergents with enzymes Washing programmes Cycle description Approximate values Press the On/off push button Operating instructionsCheck the filters Check that there is rinse aid and saltTo cancel a programme in progress For the formalities how to cancel a programme see pointAt the end of the washing programme Page Maintenance and cleaning Internal and external cleaningCleaning the filters MA16 What to do, if Dishes are not clean Wash results are not satisfactoryCustomer service Technical specifications Hints for test centres Installation LevellingConnection instructions Water supply connectionsWater outlet connection Extension hosesProtection against flooding Electrical connectionFrom the Electrolux Group. The world’s No.1 choice