AEG 54710 operating instructions Programme indicator light starts to flash

Page 14

14

To deactivate the rinse aid indicator light be sure that the dishwasher is off and then proceed as follows:

1.Press INTENSIV 70° and NORMAL 65° programme push buttons simultaneously.

2.While keeping the programme push buttons INTENSIV 70° and NORMAL 65° pressed, switch on the dishwasher by pressing the On/Off push button.

The On/Off indicator light comes on. At the same time, the indicator lights of the INTENSIV 70° and NORMAL 65° programme push buttons start flashing.

°

°

SO500

3.Press the NORMAL 65° programme push button, the correspondant indicator light keeps flashing while the indicator light of the INTENSIV 70° programme push button turns off.

At the same time the indicator light "end of programme" starts to flash.

°

°

SO502

4.Press the NORMAL 65° programme push button again, the "end of programme" indicator light turns off, this means that the rinse aid indicator light has been deactivated.

5.To memorise the operation, switch off the dishwasher by pressing the On/Off push button.

To reactivate the rinse aid indicator light follow the same process until the "end of

programme" indicator light starts to flash.

Image 14

Contents Favorit Dear customer Contents Safety instructions Using your dishwasher for its intended purposeYour dishwasher in day-to-day use Disposing of your old machine Disposing of packaging and old machineDisposing of the packaging Economical and ecological dishwashing Levelling spacers Description of the applianceInside of the appliance Upper basket stop WorktopIndicator lights Door handle On/Off indicator light On/Off push buttonBefore using your dishwasher for the first time Setting the water hardness rangeOnce, level 4 is selected Only use salt specifically designed for use in dishwashers Filling with special saltTo fill Filling with rinse aid Compartment. Clean up any rinse aid spilt duringRinse aid Programme indicator light starts to flash Adjusting the dose Loading cutlery and dishes Lower basket To lower the prongsCutlery basket To move to the higher position proceed as follows Adjusting the height of the upper basketUpper basket If using powder detergents proceed as follows Use of detergentCompact detergents with enzymes Washing programmes Cycle description Approximate values Press the On/off push button Operating instructionsCheck the filters Check that there is rinse aid and saltAt the end of the washing programme To cancel a programme in progressFor the formalities how to cancel a programme see point Page Cleaning the filters Maintenance and cleaningInternal and external cleaning MA16 What to do, if Dishes are not clean Wash results are not satisfactoryCustomer service Technical specifications Hints for test centres Installation LevellingConnection instructions Water supply connectionsWater outlet connection Extension hosesProtection against flooding Electrical connectionFrom the Electrolux Group. The world’s No.1 choice