The INTENSIV 70° indicator light remains off for about 5 seconds after which it starts flashing indicating the new level selected.
5.To memorise the new level, switch off the dishwasher by pressing the On/Off push button.
Filling with special salt
Caution! The packaging of dishwasher salt and detergents are often very similar. The accidental filling of the salt compartment with detergent would ruin the water softener. Each time you add salt, make sure the carton you have in your hand really is salt.
Only use salt specifically designed for use in dishwashers.
All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener.
Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion.
12
To fill:
1.To fill with salt, unscrew the cap of the salt container.
2.Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time).
3.Using the funnel provided, pour in the salt until the container is full.
Do not worry if water overflows from the unit when filling with salt, this is quite normal.
4.Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.
5.Screw on the cap tightly.
| E |
| |
L |
|
| |
A |
| T |
|
S |
|
| |
| L |
| |
A | LZ | ||
S |
| ||
|
| A |
|
| S | L | |
|
| E | |
|
| S |
|
SR14