AEG 54710 operating instructions Protection against flooding, Electrical connection

Page 37

Protection against flooding

The machine is fitted with a device in the bottom of the machine to protect against flooding.

The device will operate if there are any water leaks in the machine.

In case of malfunction, the "washing" and "drying" phase indicator lights start flashing (see "What to do, if.....").

In this case turn off the water tap and call the Service Centre.

Electrical connection

Before plugging the appliance into the wall socket, make sure that:

1.The mains voltage corresponds to the voltage given in the technical specifications.

2.The meter, fuses, mains power supply and wall socket can all take the maximum load required.

Make sure that the socket and plug are compatible without having to use any type of adaptor. If necessary, have the domestic wiring system socket replaced.

Safety standards require the appliance to be earthed.

The Manufacturer accepts no liability for failure to observe the above safety precautions.

37

Image 37
Contents Favorit Dear customer Contents Using your dishwasher for its intended purpose Safety instructionsYour dishwasher in day-to-day use Disposing of the packaging Disposing of packaging and old machineDisposing of your old machine Economical and ecological dishwashing Inside of the appliance Description of the applianceLevelling spacers Upper basket stop WorktopDoor handle On/Off indicator light On/Off push button Indicator lightsSetting the water hardness range Before using your dishwasher for the first timeOnce, level 4 is selected To fill Filling with special saltOnly use salt specifically designed for use in dishwashers Rinse aid Compartment. Clean up any rinse aid spilt duringFilling with rinse aid Programme indicator light starts to flash Adjusting the dose Loading cutlery and dishes To lower the prongs Lower basketCutlery basket Upper basket Adjusting the height of the upper basketTo move to the higher position proceed as follows Use of detergent If using powder detergents proceed as followsCompact detergents with enzymes Washing programmes Cycle description Approximate values Check the filters Operating instructionsPress the On/off push button Check that there is rinse aid and saltFor the formalities how to cancel a programme see point To cancel a programme in progressAt the end of the washing programme Page Internal and external cleaning Maintenance and cleaningCleaning the filters MA16 What to do, if Wash results are not satisfactory Dishes are not cleanCustomer service Technical specifications Hints for test centres Levelling InstallationWater supply connections Connection instructionsExtension hoses Water outlet connectionElectrical connection Protection against floodingFrom the Electrolux Group. The world’s No.1 choice