Enterasys Networks C2G124-48P, C2H124-48P manual Gigabit Ethernet Specifications

Gigabit Ethernet Specifications

Gigabit Ethernet Specifications

The following specifications for the Mini‐GBICs shown in Table A‐3 through Table A‐11 meet or exceed the IEEE 802.3z‐1998 standard.

MGBIC-LC01/MGBIC-MT01 Specifications (1000BASE-SX)

Table A-3 MGBIC-LC01/MGBIC-MT01 Optical Specifications

Item	62.5 µm MMF	50 µm MMF
Transmit Power (minimum)	-9.5 dBm	-9.5 dBm
Receive Sensitivity	-17 dBm	-17 dBm
Link Power Budget	7.5 dBm	7.5 dBm
Table A-4 MGBIC-LC01/MGBIC-MT01 Operating Range
Item	Modal Bandwidth @	Range
	850 nm
62.5 µm MMF	160 MHz/km	2-220 Meters
62.5 µm MMF	200 MHz/km	2-275 Meters
50 µm MMF	400 MHz/km	2-500 Meters
50 µm MMF	500 MHz/km	2-550 Meters

MGBIC-LC03 Specifications (1000BASE-LX)

Table A-5 MGBIC-LC03 Optical Specifications

Item	62.5/125 µm MMF	50/125 µm MMF
Transmit Power (minimum)	-9.5 dBm	-9.5 dBm
Transmit Power (maximum)	-3 dBM	-3 dBM
Receive Sensitivity	-20 dBm	-20 dBm
Link Power Budget1	10.5 dB	10.5 dB
(Multimode Only)

1.The maximum drive distance (up to 2 km) depends on the quality of the installed multimode fiber-optic cable segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment. The Link Power Budget must not exceed those specified in this table. The MGBIC-LC03 input power must not exceed -3 dBm. Otherwise, saturation could occur.

A-4 Specifications