Enterasys Networks C2H124-48P, C2G124-48P manual Hardware Installation

3

Hardware Installation

Electrical Hazard: Only qualified personnel should perform installation procedures.

Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de instalacion.

Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes Personal vorgenommen werden.

Important Notice

Read the Release Notes shipped with the switch to check for any exceptions to the supported features and operation documented in this guide.

This chapter provides the instructions to install the C2G124‐48P or C2H124‐48P. Unless otherwise noted, the instructions apply to both switches. Follow the order of the sections listed below to correctly install the switches.

For information about...	Refer to page...
Required Tools	3-2
Unpacking the Switch	3-2
Considerations Prior to Installation	3-2
Installing Optional Mini-GBICs	3-3
Installing the Switch on a Flat Surface	3-6
Connecting High-Speed Stacking Cables	3-10
Configuring Switches in a Stack	3-12
Connecting AC and PoE Power	3-15
Connecting to Console Port for Local Management	3-17
Connecting to the Network	3-21
Completing the Installation	3-30

SecureStack C2 Installation Guide 3-1