Using the Reset Button
To reset the switch password, refer back to Figure 4‐3 and proceed as follows:
Note: Notify the system manager before changing the password.
1.Press‐and‐hold the Reset button while the switch is operational. This change of the login password to the default password will be indicated through CLI only.
2.Logon to device management. You can now logon to the switch through the Console port and assign a new password using the command line interface (CLI).
3.To access switch management from your local PC, terminal, or modem connection, refer to the SecureStack C2 Configuration Guide for instructions on how to log in and enter a new password. The guide is available at:
http://www.enterasys.com/support/manuals
If you require assistance, contact Enterasys Networks using one of the methods described in “Getting Help” on page 1‐7.
SecureStack C2 Installation Guide
