Enterasys Networks C2G124-48P, C2H124-48P manual Mgbic

Using LANVIEW

Table 4-1 LANVIEW LED Diagnostic Indications (continued)

LED	Color	State		Recommended Action
Link/	Off	1.	No link.	None.
Activity		2.	No activity or port in standby.	None.
(RJ45
		3.	The port is deactivated because the	None.
PoE ports
			Mini-GBIC port with the same port number
1–48)
			is linked.
	Green	Solid. Port is linked, but the interface is not		None.
		receiving any traffic. PoE power is okay.
		Blinking. Port is linked and traffic is being		None.
		received or transmitted by the interface. PoE
		power is okay.
	Amber	Solid. Port is linked, but traffic is not being		1. Check the attached powered device
		received or transmitted by the interface. PoE		to see if it is defective.
		power has failed.		2. Internal power supply failed, contact
		PoE power may have been deactivated because
				Enterasys Networks for technical
		of excessive power requirement or deactivated		support.
		by configuration.
		Power Supply failed.
		Blinking. Port is linked and traffic is being		1. Check the attached powered device
		received or transmitted by the interface. PoE		to see if it is defective.
		power has failed.		2. Internal power supply failed, contact
		PoE power may have been deactivated because
				Enterasys Networks for technical
		of excessive power requirement or deactivated		support.
		by configuration.
		Power supply failed.
Link/	Off	1.	No link.	None.
Activity		2.	No activity or port in standby.	None.
(MGBIC
		3.	The port is deactivated because the RJ45	None.
ports 45–
			port with the same port number is linked.
48)
	Green	Solid. Port is linked, but the interface is not		None.
		receiving any traffic.
		Blinking. Port is linked and traffic is being		None.
		received or transmitted by the interface.

4-6 Troubleshooting