AEG 54710 operating instructions Your dishwasher in day-to-day use

Page 5

Your dishwasher in day-to-day use

Never operate your dishwasher if the electrical supply lead, supply or drainhose, control panel, worktop or plinth are damaged.

If there is a fault, first turn the water tap off. Then switch off your machine and pull the plug out of the socket. If there is a fixed connection, switch off or unscrew the fuse(s).

Never pull the plug out of the socket by the cable - always hold the plug.

Dishwasher repairs should only be performed by trained personnel.

Improper repairs may seriously endanger the user. If your dishwasher needs to be repaired, you should contact our service centre or your retailer.

Never place any solvents in your dishwasher or you may cause an explosion!

Do not rest or sit on the open door or the machine could tilt.

Before using special dishwasher salt, detergent or rinse-aid, make sure that the manufacturer of these products expressly specifies their use in domestic dishwashers.

Always turn off the water tap when your dishwasher is left unattended for any length of time, e.g. when you are away on holiday.

Only transport the dishwasher in an upright position. Tipping it upside down during transport could cause salty water to leak into the internal compartment and lead to the formation of rust.

5

Image 5
Contents Favorit Dear customer Contents Using your dishwasher for its intended purpose Safety instructionsYour dishwasher in day-to-day use Disposing of your old machine Disposing of packaging and old machineDisposing of the packaging Economical and ecological dishwashing Inside of the appliance Description of the applianceLevelling spacers Upper basket stop WorktopDoor handle On/Off indicator light On/Off push button Indicator lightsSetting the water hardness range Before using your dishwasher for the first timeOnce, level 4 is selected Only use salt specifically designed for use in dishwashers Filling with special saltTo fill Filling with rinse aid Compartment. Clean up any rinse aid spilt duringRinse aid Programme indicator light starts to flash Adjusting the dose Loading cutlery and dishes To lower the prongs Lower basketCutlery basket To move to the higher position proceed as follows Adjusting the height of the upper basketUpper basket Use of detergent If using powder detergents proceed as followsCompact detergents with enzymes Washing programmes Cycle description Approximate values Check the filters Operating instructionsPress the On/off push button Check that there is rinse aid and saltAt the end of the washing programme To cancel a programme in progressFor the formalities how to cancel a programme see point Page Cleaning the filters Maintenance and cleaningInternal and external cleaning MA16 What to do, if Wash results are not satisfactory Dishes are not cleanCustomer service Technical specifications Hints for test centres Levelling InstallationWater supply connections Connection instructionsExtension hoses Water outlet connectionElectrical connection Protection against floodingFrom the Electrolux Group. The world’s No.1 choice