ROUTINE MAINTENANCE
WARNING
Always disconnect the power supply to the unit prior to any repair or maintenance of the unit in
order to prevent electric shock or injury.
Ensure you do not inhale or consume medication or aerosols from around the unit at the time of maintenance. These may be harmful to your health.
Cleaning of cabinet
•Clean the unit once a month. Regular cleaning keeps the unit looking new.
•Use a dry cloth to wipe off small amounts of dirt on the outside and inside of the unit and all accessories. If some of them are dirty, use a cloth containing diluted neutral dishwashing detergent (Undiluted detergent may break the plastic parts. For the dilution, follow the instruction enclosed with the detergent). When a diluted neutral dishwashing detergent is used, wipe the cabinet or accessories thoroughly with a cloth soaked in clean water. Then wipe the cabinet or accessories unit with a dry cloth to eliminate the moisture.
•Never pour water onto or into the unit. Doing so can damage the electrical insulation and may cause electric shock or short circuit.
•The compressor and other mechanical part are completely sealed. This unit requires absolutely no lubrication.
•Remove dust from the power supply plug periodically. A dusty plug or improper insertion may pose a hazard.
Replacement of fluorescent lamp
The fluorescent lamp is placed horizontally in the upper front of the chamber. Follow the procedure below to replace the lamp.
1. Turn off the fluorescent light switch and disconnect the power supply plug.
2.Hold the cover of the light and pull downward with lead wire to remove the lamp from stopper. (Fig. 1)
3.Remove the
2) | Fig. 1 | |
4. Remove the socket on the left. (Fig. 2) |
| |
5. Take out the fluorescent lamp gently from the | ||
protective cover. | ||
|
6.After placing a new fluorescent lamp in the
protective cover, replace the socket and then replace | Socket |
the |
|
7. Fix the light with the stoppers. |
|
Fig. 2
20