Middleby Marshall PS53GS Gas manual Installation

Page 6

SECTION 2 - INSTALLATION

WARNING - For gas ovens, after any conversions, readjustments, or service work on the oven:

•Perform a gas leak test.

•Test for correct air supply.

•Test for proper combustion and gas supply.

•Check that the ventilation system is in operation.

WARNING

Keep the appliance area free and clear of combustibles.

WARNING

The oven must be installed on an even (level) non-flammable flooring and any adjacent walls must be non-flammable. Recommended minimum clearances are specified in the Description section of this Manual.

WARNING

Do not obstruct the flow of combustion and ventilation air to and from your oven. There must be no obstructions around or underneath the oven. Constructional changes to the area where the oven is installed shall not affect the air supply to the oven.

CAUTION

For additional installation information, contact your local Authorized Service Agent.

NOTE

There must be adequate clearance between the oven and combustible construction. Clearance

must also be provided for servicing and for proper operation.

NOTE

An electrical wiring diagram for the oven is located inside the machinery compartment.

NOTE

All aspects of the oven installation, including placement, utility connections, and ventilation requirements,

must conform with any applicable local, national, or international codes. These codes supersede the

requirements and guidelines provided in this manual.

NOTE

In the USA, the oven installation must conform with local codes. In the absence of local codes, gas oven

installations must conform with the National Fuel Gas Code, ANSI Z223.1. Installed ovens must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code (NEC), or ANSI/NFPA70.

NOTE

In Canada, the oven installation must conform with local codes. In the absence of local codes, gas oven installations must conform with the Natural Gas Installation Code, CAN/CGA-B149.1, or the Propane Gas Installation Code, CAN/CGA-B149.2, as applicable. Installed ovens must be electrically grounded in accordance with local codes, or in the absence of local codes, with the Canadian Electrical Code CSA C22.2.

NOTE

In Australia, the oven installation must conform with any requirements of the appropriate statutory authority.

Gas oven installtions must conform with AGA Codes AG311 and AG601.

NOTE

In CE countries, all aspects of the gas supply connection must comply with current IEC/CEE requirements and with all applicable local, national, and international codes. In addition, four casters are provided to allow the oven to be more easily moved to the installation location. These casters are intended to simplify pre-installation movement only, and are NOT suitable for use as part of a CE oven installation. During the installation procedure, the casters MUST be removed, so that the oven can be supported by the supplied 152mm adjustable legs.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents PS536GS Gas Ovens For Your Safety Retain This Manual For Future ReferenceTable of Contents Oven Uses III. Oven SpecificationsDescription Conveyor Drive Motor Moves the conveyorElectrical specifications for gas ovens per oven cavity Installation Gas hose, 3/4″ to 1/2″ Gas hose reducer Owners Operating and Installation ManualAuthorized Service Agency Listing Included with gas hoseRecommendations II. Ventilation SystemRequirements Other ventilation concernsFor domestic and standard export ovens III. AssemblyTop Panel and Base Pad Assembly For CE export ovensRestraint Cable Installation StackingConveyor Installation 10 Conveyor placementFinal Assembly 12 Conveyor and master link orientationIV. Electrical Supply Additional Information Gas OvensConnection Gas Line DuringpressuretestingnotethefollowingGAS Supply Gas ConversionAdjusting the Orifice Manifold Pressure and Heat Input Checking the Gas Supply Inlet PressureOperation Location and Description of ControlsDailystartupprocedure DailyshutdownprocedureII. Normal Operation STEP-BY-STEP Overtemp III. Quick Reference Digital Temperature ControllerSP Lock Heat onMaintenance Maintenance DailyII. Maintenance Monthly III. Maintenance Every 3 MonthsSplit Belt Disassembly and Cleaning Disassembling the idler shaft IV. Maintenance Every 6 Months Blower BeltLubricating the Blower Fan Bearings Parts List KEY Spare Parts KITQTY Description Page II. Installation KIT QTY Singleoven Doubleoven Tripleoven DescriptionPage III. PANELS, END Plugs and Window See ppNot Page IV. Control Compartment Page Cooling only Machinery Compartment and GAS TrainThis location. The opening provides passive Not ShownPage VI. Rear Compartment and Blowers Page VII. SINGLE-BELT Conveyors Item QTY Conveyor DescriptionPage VIII. SPLIT-BELT Conveyors Page Electrical Wiring Diagrams Wiring diagram, PS536GS Gas Oven 208/240V, 50/60 Hz, 1 PhWiring diagram, PS536GS Gas Oven 208/240V, 50/60 Hz, 1 Ph Wiring diagram, PS536GS Gas Oven 208/240V, 50/60 Hz, 1 Ph Page Page Hour Service Hotline

PS53GS Gas specifications

The Middleby Marshall PS53GS Gas is a state-of-the-art conveyor oven designed to meet the needs of high-volume pizzerias and restaurants that require consistent performance and excellent food quality. With its innovative design and advanced technologies, the PS53GS delivers efficient cooking, enhances productivity, and maximizes flavor, making it an essential addition to any commercial kitchen.

One of the standout features of the PS53GS is its dual air impingement technology. This system optimizes airflow within the cooking chamber, allowing for even heat distribution and faster cooking times. As a result, pizzas and other baked goods achieve a perfectly cooked crust, ensuring that every dish served is of the highest quality. The oven’s high-performance burners provide precise temperature control, allowing chefs to set the desired cooking temperature for a wide range of menu items, from classic pizzas to baked pasta and bread.

The PS53GS is engineered for durability, built with stainless steel construction that not only gives it a sleek appearance but also ensures long-lasting performance. The oven's insulation retains heat efficiently, reducing energy consumption and operating costs. Additionally, the removable conveyor belt is designed for easy cleaning, making maintenance a breeze in a busy kitchen environment.

One of the commonly recognized characteristics of the PS53GS is its user-friendly control panel. Featuring intuitive digital controls, operators can easily adjust cooking times, temperatures, and conveyor speed to achieve the perfect results for various menu items. The customizable settings facilitate quick adjustments, enabling restaurants to cater to changing customer preferences and peak service times without sacrificing quality.

For enhanced operational efficiency, the PS53GS is available in various configurations to suit different kitchen layouts. The compact design allows it to fit into limited spaces while still providing ample cooking capacity. This versatility makes it an excellent choice for small establishments as well as larger operations looking to optimize their kitchen workflow.

In conclusion, the Middleby Marshall PS53GS Gas conveyor oven is a top-tier solution for any commercial kitchen focused on delivering exceptional food quality and efficiency. Through its advanced cooking technologies, durable construction, and user-friendly features, it stands out as an industry leader that can help businesses thrive in a competitive market. Whether for pizzas, pastries, or a variety of baked goods, the PS53GS is a reliable partner in culinary excellence.
Top Page Image Contents