Extron electronic TP T 15HD A Installation and Operation, cont’d, Video DIP switch, Audio jumpers

Page 10

Installation and Operation, cont’d

 

TP T 15HD A

TP T BNC DA4

 

Remove 6

Remove 5 BNC hex nuts.

 

 

 

screws.

 

 

Lift cover

Component,

 

straight up.

1

1

S-video,

1

1

RGB Composite

1

1

 

 

 

 

1

1

 

 

1

1

 

 

 

 

1

1

Component,

RGB

 

1

1

 

S-video,

 

J1

1

1

Composite

 

 

 

 

J2

 

 

 

 

 

 

 

 

J12

 

 

 

 

 

J11

 

 

 

 

 

 

U31

 

 

 

 

TP T BNC DA4

TP T 15HD A and TP T 15HD AV

Figure 2-1 — Video jumper configuration

2. TP T BNC DA4: Using an Extron BNC extraction tool (part #100-096-01) or a 14 mm, deep well socket with thin walls, remove the five hex nuts securing the BNC connectors to the rear panel. Slide the cover forward until the cover clears the BNC connectors

3.

Lift the cover off.

4. TP T 15HD A and TP T 15HD AV: Locate J1 and J2 on the printed circuit board. See figure 2-1.

a. For RGB video, ensure that pin 2 is jumpered to pin 3 on both jumper locations.

b. For any other video format, ensure that pin 1 is jumpered to pin 2 on both jumper locations.

TP T BNC DA4: Locate J11 and J12 on the printed circuit board. See figure 2-1.

a. For RGB video, ensure that pin 2 is jumpered to pin 3 on both jumper locations.

b. For any other video format, ensure that pin 1 is jumpered to pin 2 on both jumper locations.

5.

Replace the cover and reinstall the screws.

Video DIP switch

The TP T 468 can be configured to transmit component video,

 

 

 

 

S-video, or composite video. To configure the TP T 468

2

 

 

 

for RGB video, set DIP switch 2 on the back of the

 

 

 

 

 

 

1

 

 

 

transmitter to Off. For any other video format set the

 

 

 

O N

 

switch to On.

Audio jumpers

Older (unmodified) transmitters and receivers are fully compatible with each other but not with the TPX 88 A twisted pair matrix switcher.

Redesigned (modified) transmitters and receivers are fully compatible with each other and with the TPX 88 A. They can also be jumpered to be compatible with the older (unmodified) receivers and transmitters but not the TPX 88 A.

Redesigned (modified) transmitters and receivers have an identifying label.

The audio that is associated with the composite video link of TP T 15HD AV transmitters is transmitted on wire pair 3 and 6. This configuration is compatible with redesigned TP receivers and the TPX 88 A.

If you intend to match this transmitter with an older, unmodified TP receiver, and do not plan to include a TPX 88 A in your system, you can set the transmitter to send the audio on wire pair 7 and 8, to be compatible with an older TP receiver, by shifting internal jumpers as follows:

2-4

Extron TP Transmitters • Installation and Operation

Extron TP Transmitters • Installation and Operation

2-5

Page 9 Page 11
Image 10
Page 9 Page 11
Contents TP Transmitters Family Precautions Extron’s WarrantyFCC Class a Notice Table of Contents Appendix a Specifications , Accessories, Table of Contents, cont’dTP Transmitters Introductionduction,cont’d About the TP Transmitters FeaturesTP T 15HD a transmitter TP T 468 transmitter Introduction, cont’dTP T 15HD AV transmitter TP T BNC DA4 transmitter/distribution amplifierTwo Overview Instaltal lationandandOperation,cont’d InstallationExtron TP Transmitters Installation and Operation Video jumpersVideo DIP switch Installation and Operation, cont’dAudio jumpers Tabletop use Rack mounting procedureMounting the TP T 15HD A, TP T 15HD AV, or UL rack mounting guidelinesAttach the rack shelf to the rack using the supplied bolts Under-desk mountingTP T 468 Installation Overview Installing the TP TThrough-desk mounting Preparing the site and installing the mud ring or wall box UL guidelines for wall box installationEuro Channel models Grounding outer braided and foil shields Mounting the AAP devices Mounting the transmitter to the mud ring or wall boxInstalling the Euro Channel transmitter Grounding the transmitterInput cabling Computer video and PC audioComputer Input connector Connect a 16 Installation features, TP TComposite video and stereo audio Transmitted signal cablingRgbhv video Termination of TP cable Cable testingEqualizing pair skew Unique TP T 468 front panel features Front Panel Control and IndicatorsPower connector If the image is not displayed correctly TroubleshootingIf the image does not appear If the receiver’s Manual/Auto LED flashesAAppendix Audio input VideoAudio GeneralSpecifications, Accessories, and Part Numbers, cont’d TP T 15HD AV TP T BNC DA4Cables and Adapters AccessoriesIncluded Parts TP TOptional Adapter Plates Rear connector typeFront connector type Adapter plate descriptionMulti Type Connector Architectural Adapter Plates TP T 468 4-gang Cut-out Template TP T 468 TemplateSpecifications, Accessories, and Part Numbers, cont’d
Related manuals
Manual 1 pages 13.51 Kb Manual 1 pages 31.54 Kb

TP T 468, TP T 15HD A, TP T 15HD AV, TP T BNC DA4 specifications

The Extron Electronics TP T BNC DA4 is a cutting-edge distribution amplifier designed for professional audio and video applications. It elegantly combines a compact form factor with robust functionality, making it an essential tool for any AV system requiring signal distribution. This unit is built to handle high-resolution video signals with ease, ensuring that content reaches multiple outputs without degradation or loss in quality.

One of the standout features of the TP T BNC DA4 is its ability to support a wide range of signals including SDI, HD-SDI, and 3G-SDI. This versatility allows it to adapt seamlessly to various broadcast and production environments, ensuring compatibility with existing equipment. The unit boasts four identical BNC outputs, which can deliver pristine video signals to multiple displays or recording devices.

The TP T BNC DA4 employs advanced technologies to maintain signal integrity over longer distances. The unit features advanced signal processing, ensuring that even when distributing signals across significant lengths, there is minimal degradation. This is crucial in professional settings where maintaining signal fidelity is paramount.

Built with reliability in mind, the Extron TP T BNC DA4 is constructed from durable materials and designed for easy integration into various rack environments. Furthermore, its compact design ensures that it can be installed without taking up excessive space, which is an essential consideration in many professional settings.

Another important characteristic of the TP T BNC DA4 is its user-friendly interface. With straightforward controls and clear status indicators, operators can easily monitor signal quality and configuration. The device also offers options for adjusting sync settings and maintaining optimum performance.

Finally, the Extron TP T BNC DA4 is backed by the company’s commitment to quality and support, providing users with peace of mind and reliability. Extron's reputation for excellence in the AV industry makes the TP T BNC DA4 a trusted choice among professionals who require high-quality signal distribution solutions.

In summary, the Extron Electronics TP T BNC DA4 is a powerful and reliable distribution amplifier that meets the demands of modern AV systems with its advanced features, robust build quality, and commitment to signal integrity. It is an indispensable component for any professional setup that seeks to deliver high-quality audio and video signals to multiple outputs efficiently.
Top Page Image Contents