Extron electronic TP T 468, TP T BNC DA4, TP T 15HD AV Grounding outer braided and foil shields

Page 15

Installation and Operation, cont’d

5. If you are using a wall box, feed cables through the wall box punch-out holes, and secure them with cable clamps to provide strain relief.

6.

Exposed cable shields (braids or foil) are potential sources

 

of short circuits. Trim back and/or insulate shields with

 

heat shrink (figure 2-7).

 

 

Wall Stud

 

 

 

Screws or Nails

 

 

 

Cable

 

 

 

Clamp

 

 

 

Foil

 

Braided

 

Shield

 

 

 

Shield

 

Installation

 

 

Screw

 

 

Cable

 

 

 

 

Figure 2-7 — Grounding outer braided and foil shields

To prevent short circuits, cut back the outer foil shield to the point where the cable exits the cable clamp. Both braided and foil shields should be connected to an equipment ground at the other end of the cable.

7. If you are using a mud ring, follow the directions, if any, that came with the mud ring to attach the clips that fasten it to the wall or furniture (figure 2-8).

Sheet Rock

Backing Clip

0.75" #6-32

 

 

Screw

Mounting Bracket

 

Detail A

 

 

Sheet Rock

 

 

Backing Clip

 

 

1.25" #6-32

MONITOR

 

Screw

T 468

Mounting Bracket

TP

 

INPUT

 

Detail B

Extron

 

Backing Clip can

TP T 468

 

 

 

be in either orientation. See Detail A or Detail B.

Figure 2-8 — Attaching a mud ring to a wall

If you are using a wall box, insert the wall box into the opening, and attach it to the wall stud/furniture with nails or screws, leaving the front edge flush with the outer wall or furniture surface (figure 2-9).

If attaching the wall box to wood, use four #8 or #10 screws or 10-penny nails. A minimum of 1/2 inch (1.3 cm) of screw threads must penetrate the wood.

If attaching the wall box to metal studs or furniture, use four #8 or #10 self-tapping sheet metal screws or machine bolts with matching nuts.

2-14 Extron TP Transmitters • Installation and Operation

Extron TP Transmitters • Installation and Operation 2-15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents TP Transmitters Family Extron’s Warranty PrecautionsFCC Class a Notice Table of Contents Table of Contents, cont’d Appendix a Specifications , Accessories,TP Transmitters Features Introductionduction,cont’d About the TP TransmittersTP T 15HD a transmitter TP T BNC DA4 transmitter/distribution amplifier Introduction, cont’dTP T 15HD AV transmitter TP T 468 transmitterTwo Video jumpers Instaltal lationandandOperation,cont’d InstallationExtron TP Transmitters Installation and Operation OverviewInstallation and Operation, cont’d Video DIP switchAudio jumpers UL rack mounting guidelines Rack mounting procedureMounting the TP T 15HD A, TP T 15HD AV, or Tabletop useUnder-desk mounting Attach the rack shelf to the rack using the supplied boltsInstalling the TP T TP T 468 Installation OverviewThrough-desk mounting UL guidelines for wall box installation Preparing the site and installing the mud ring or wall boxEuro Channel models Grounding outer braided and foil shields Mounting the transmitter to the mud ring or wall box Mounting the AAP devicesGrounding the transmitter Installing the Euro Channel transmitterComputer video and PC audio Input cabling16 Installation features, TP T Computer Input connector Connect aTransmitted signal cabling Composite video and stereo audioRgbhv video Cable testing Termination of TP cableEqualizing pair skew Front Panel Control and Indicators Unique TP T 468 front panel featuresPower connector If the receiver’s Manual/Auto LED flashes TroubleshootingIf the image does not appear If the image is not displayed correctlyAAppendix General VideoAudio Audio inputTP T 15HD AV TP T BNC DA4 Specifications, Accessories, and Part Numbers, cont’dTP T AccessoriesIncluded Parts Cables and AdaptersAdapter plate description Rear connector typeFront connector type Optional Adapter PlatesMulti Type Connector Architectural Adapter Plates TP T 468 Template TP T 468 4-gang Cut-out TemplateSpecifications, Accessories, and Part Numbers, cont’d
Related manuals
Manual 1 pages 13.51 Kb Manual 1 pages 31.54 Kb

TP T 468, TP T 15HD A, TP T 15HD AV, TP T BNC DA4 specifications

The Extron Electronics TP T BNC DA4 is a cutting-edge distribution amplifier designed for professional audio and video applications. It elegantly combines a compact form factor with robust functionality, making it an essential tool for any AV system requiring signal distribution. This unit is built to handle high-resolution video signals with ease, ensuring that content reaches multiple outputs without degradation or loss in quality.

One of the standout features of the TP T BNC DA4 is its ability to support a wide range of signals including SDI, HD-SDI, and 3G-SDI. This versatility allows it to adapt seamlessly to various broadcast and production environments, ensuring compatibility with existing equipment. The unit boasts four identical BNC outputs, which can deliver pristine video signals to multiple displays or recording devices.

The TP T BNC DA4 employs advanced technologies to maintain signal integrity over longer distances. The unit features advanced signal processing, ensuring that even when distributing signals across significant lengths, there is minimal degradation. This is crucial in professional settings where maintaining signal fidelity is paramount.

Built with reliability in mind, the Extron TP T BNC DA4 is constructed from durable materials and designed for easy integration into various rack environments. Furthermore, its compact design ensures that it can be installed without taking up excessive space, which is an essential consideration in many professional settings.

Another important characteristic of the TP T BNC DA4 is its user-friendly interface. With straightforward controls and clear status indicators, operators can easily monitor signal quality and configuration. The device also offers options for adjusting sync settings and maintaining optimum performance.

Finally, the Extron TP T BNC DA4 is backed by the company’s commitment to quality and support, providing users with peace of mind and reliability. Extron's reputation for excellence in the AV industry makes the TP T BNC DA4 a trusted choice among professionals who require high-quality signal distribution solutions.

In summary, the Extron Electronics TP T BNC DA4 is a powerful and reliable distribution amplifier that meets the demands of modern AV systems with its advanced features, robust build quality, and commitment to signal integrity. It is an indispensable component for any professional setup that seeks to deliver high-quality audio and video signals to multiple outputs efficiently.
Top Page Image Contents