Extron electronic TP T 15HD AV Grounding the transmitter, Installing the Euro Channel transmitter

Page 17

Installation and Operation, cont’d

Cable

Clamp

Installation

Cable

MONITOR

T

46

8

 

TP

 

 

INPUT

TP T 468

Figure 2-11 — Mounting the transmitter to the wall box

4. Reconnect the power supply and restore power to the equipment.

Installing the Euro Channel transmitter

Once the EC transmitter has been cabled and tested, the transmitter can be installed in the Euro Channel.

1.Remove power from the interface by disconnecting the power supply.

2.Mount the interface to the Euro Channel by attaching the faceplate to the two mounting brackets using the four #4- 40 mounting screws (figure 2-12).

HIFT

 

H.S

 

MONITOR

MIN/MAX

460

INPUT

T

 

TP

R

AUDIO

NITO

 

MO

R

NO

ITO

MON

Euro Channel

Figure 2-12 — Mounting the transmitter in a Euro Channel

Grounding the transmitter

RGB and computer video transmitters may need to be grounded to ensure that the video and audio are not degraded. The

TP T 15HD A, TP T 15HD AV, and TP T 468 may require grounding if all of the following conditions are true:

•The signal source is a laptop computer.

•No local monitor is connected.

•A local power supply is not being used.

Grounding may also be required if there is no common ground in the power distribution system.

Indications that grounding may be required include:

•The receiver’s Power LED is lit amber when a connection is made to the transmitter.

•The receiver is in auto mode and its Manual/Auto LED flashes.

•The receiver is in manual mode and an image appears only when the Peaking adjustment is at the minimum level. Additionally, the image may be overpeaked with horizontal streaking to the right of displayed information.

•No audio, or distorted and noisy audio, is heard.

2-18 Extron TP Transmitters • Installation and Operation

Extron TP Transmitters • Installation and Operation 2-19

Page 16 Page 18
Image 17
Page 16 Page 18
Contents TP Transmitters Family Extron’s Warranty PrecautionsFCC Class a Notice Table of Contents TP Transmitters Table of Contents, cont’dAppendix a Specifications , Accessories, TP T 15HD a transmitter FeaturesIntroductionduction,cont’d About the TP Transmitters TP T 15HD AV transmitter Introduction, cont’dTP T 468 transmitter TP T BNC DA4 transmitter/distribution amplifierTwo Extron TP Transmitters Installation and Operation Instaltal lationandandOperation,cont’d InstallationOverview Video jumpersAudio jumpers Installation and Operation, cont’dVideo DIP switch Mounting the TP T 15HD A, TP T 15HD AV, or Rack mounting procedureTabletop use UL rack mounting guidelinesUnder-desk mounting Attach the rack shelf to the rack using the supplied boltsThrough-desk mounting Installing the TP TTP T 468 Installation Overview Euro Channel models UL guidelines for wall box installationPreparing the site and installing the mud ring or wall box Grounding outer braided and foil shields Mounting the transmitter to the mud ring or wall box Mounting the AAP devicesGrounding the transmitter Installing the Euro Channel transmitterComputer video and PC audio Input cabling16 Installation features, TP T Computer Input connector Connect aRgbhv video Transmitted signal cablingComposite video and stereo audio Equalizing pair skew Cable testingTermination of TP cable Power connector Front Panel Control and IndicatorsUnique TP T 468 front panel features If the image does not appear TroubleshootingIf the image is not displayed correctly If the receiver’s Manual/Auto LED flashesAAppendix Audio VideoAudio input GeneralTP T 15HD AV TP T BNC DA4 Specifications, Accessories, and Part Numbers, cont’dIncluded Parts AccessoriesCables and Adapters TP TFront connector type Rear connector typeOptional Adapter Plates Adapter plate descriptionMulti Type Connector Architectural Adapter Plates TP T 468 Template TP T 468 4-gang Cut-out TemplateSpecifications, Accessories, and Part Numbers, cont’d
Related manuals
Manual 1 pages 13.51 Kb Manual 1 pages 31.54 Kb

TP T 468, TP T 15HD A, TP T 15HD AV, TP T BNC DA4 specifications

The Extron Electronics TP T BNC DA4 is a cutting-edge distribution amplifier designed for professional audio and video applications. It elegantly combines a compact form factor with robust functionality, making it an essential tool for any AV system requiring signal distribution. This unit is built to handle high-resolution video signals with ease, ensuring that content reaches multiple outputs without degradation or loss in quality.

One of the standout features of the TP T BNC DA4 is its ability to support a wide range of signals including SDI, HD-SDI, and 3G-SDI. This versatility allows it to adapt seamlessly to various broadcast and production environments, ensuring compatibility with existing equipment. The unit boasts four identical BNC outputs, which can deliver pristine video signals to multiple displays or recording devices.

The TP T BNC DA4 employs advanced technologies to maintain signal integrity over longer distances. The unit features advanced signal processing, ensuring that even when distributing signals across significant lengths, there is minimal degradation. This is crucial in professional settings where maintaining signal fidelity is paramount.

Built with reliability in mind, the Extron TP T BNC DA4 is constructed from durable materials and designed for easy integration into various rack environments. Furthermore, its compact design ensures that it can be installed without taking up excessive space, which is an essential consideration in many professional settings.

Another important characteristic of the TP T BNC DA4 is its user-friendly interface. With straightforward controls and clear status indicators, operators can easily monitor signal quality and configuration. The device also offers options for adjusting sync settings and maintaining optimum performance.

Finally, the Extron TP T BNC DA4 is backed by the company’s commitment to quality and support, providing users with peace of mind and reliability. Extron's reputation for excellence in the AV industry makes the TP T BNC DA4 a trusted choice among professionals who require high-quality signal distribution solutions.

In summary, the Extron Electronics TP T BNC DA4 is a powerful and reliable distribution amplifier that meets the demands of modern AV systems with its advanced features, robust build quality, and commitment to signal integrity. It is an indispensable component for any professional setup that seeks to deliver high-quality audio and video signals to multiple outputs efficiently.
Top Page Image Contents