Extron electronic TP T 15HD AV, TP T BNC DA4, TP T 468 user manual Video, Audio input, General

Page 25

Specifications,cations, Accessories,and Pandrt Numbers,Part Numberscont’d

Video

Number/signal type

1, 2, or 4 sets of proprietary analog signals

Connectors

1, 2, or 4 shielded RJ-45 female

Video input Number/signal type

TP T 15HD A, TP T 468 ... 1 analog RGBHV, RGBS, RGsB, component video, or S-video; or

1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL composite video from a single source

TP T 15HD AV ................. 1 analog RGBHV, RGBS, RGsB,

component video, or S-video; or

1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL/SECAM composite video from a single source

and 1 NTSC/PAL/SECAM composite video

TP T BNC DA4 .................. 1 analog RGBHV, RGBS, RGsB,

component video, or S-video; or

1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL/SECAM composite video from a single source

Connectors

TP T 15HD A, TP T 468 ... (1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available)

TP T 15HD AV

(1) 15-pin HD female (Mac and Sun/SGI

 

to VGA adapters are available)

 

1 RCA female

TP T BNC DA4

5 BNC female

Nominal level

1.0 Vp-p for Y of component video and

 

S-video, and for composite video

 

0.7 Vp-p for RGB and for R-Y and B-Y of

 

component video

 

0.3 Vp-p for C of S-video

Minimum/maximum level(s) ....

0.3 V to 1.45 V p-p, no offset at unity gain

Impedance

75 ohms

Horizontal frequency

15 kHz to 130 kHz

Vertical frequency

30 Hz to 150 Hz

Video output — Refer to the TP Receivers Family User’s Manual.

Audio

Number/signal type

1 or 2 sets of analog proprietary signals

Connectors

1 or 2 RJ-45 female

Frequency response

20 Hz to 20 kHz, ±0.05 dB

THD + Noise

0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal

 

level

S/N

>63 dB at the rated maximum output

Crosstalk

<-80 dB @ 1 kHz, fully loaded

Stereo channel separation

>80 dB @ 1 kHz

CMRR

>33 dB @ 20 Hz to 20 kHz

Audio input

Number/signal type

 

TP T 15HD A, TP T 468 ...

1 stereo, unbalanced

TP T 15HD AV

2 stereo, unbalanced

Connectors

 

TP T 15HD A, TP T 468 ...

(1) 3.5 mm mini jack

TP T 15HD AV

(1) 3.5 mm mini jack, 2 female RCA

Impedance

5k ohms, unbalanced, DC coupled

Nominal level

-10 dBV (316 mV)

Maximum level

+5.5 dBu, (unbalanced) at 1% THD+N

CMRR

>75 dB @ 20 Hz to 20 kHz

Audio output — Refer to the TP Receivers Family User’s Manual.

General

Power

TP T 15 HD A, TP T 468,

TP T 15 HD AV

15 VDC, 0.8 A, external or provided by the

 

 

 

TP R receiver for up to 300' (91.4 m)

TP T BNC DA4

15 VDC, 0.8 A, external

 

 

 

The TP R 15HD A receiver does not provide power to

 

 

 

 

 

 

any twisted pair transmitter.

Temperature/humidity

Storage -40 to +158 °F (-40 to +70 °C) /

 

 

 

10% to 90%, non-condensing

 

 

 

Operating +32 to +122 °F (0 to +50 °C) /

 

 

 

10% to 90%, non-condensing

Cooling

Convection, no vents

A-2

Extron TP Transmitters • Specifications, Accessories, and Part Numbers

Extron TP Transmitters • Specifications, Accessories, and Part Numbers

A-3

Image 25
Contents TP Transmitters Family Extron’s Warranty PrecautionsFCC Class a Notice Table of Contents Appendix a Specifications , Accessories, Table of Contents, cont’dTP Transmitters Introductionduction,cont’d About the TP Transmitters FeaturesTP T 15HD a transmitter TP T 15HD AV transmitter Introduction, cont’dTP T 468 transmitter TP T BNC DA4 transmitter/distribution amplifierTwo Extron TP Transmitters Installation and Operation Instaltal lationandandOperation,cont’d InstallationOverview Video jumpersVideo DIP switch Installation and Operation, cont’dAudio jumpers Mounting the TP T 15HD A, TP T 15HD AV, or Rack mounting procedureTabletop use UL rack mounting guidelinesUnder-desk mounting Attach the rack shelf to the rack using the supplied boltsTP T 468 Installation Overview Installing the TP TThrough-desk mounting Preparing the site and installing the mud ring or wall box UL guidelines for wall box installationEuro Channel models Grounding outer braided and foil shields Mounting the transmitter to the mud ring or wall box Mounting the AAP devicesGrounding the transmitter Installing the Euro Channel transmitterComputer video and PC audio Input cabling16 Installation features, TP T Computer Input connector Connect aComposite video and stereo audio Transmitted signal cablingRgbhv video Termination of TP cable Cable testingEqualizing pair skew Unique TP T 468 front panel features Front Panel Control and IndicatorsPower connector If the image does not appear TroubleshootingIf the image is not displayed correctly If the receiver’s Manual/Auto LED flashesAAppendix Audio VideoAudio input GeneralTP T 15HD AV TP T BNC DA4 Specifications, Accessories, and Part Numbers, cont’dIncluded Parts AccessoriesCables and Adapters TP TFront connector type Rear connector typeOptional Adapter Plates Adapter plate descriptionMulti Type Connector Architectural Adapter Plates TP T 468 Template TP T 468 4-gang Cut-out TemplateSpecifications, Accessories, and Part Numbers, cont’d
Related manuals
Manual 1 pages 13.51 Kb Manual 1 pages 31.54 Kb

TP T 468, TP T 15HD A, TP T 15HD AV, TP T BNC DA4 specifications

The Extron Electronics TP T BNC DA4 is a cutting-edge distribution amplifier designed for professional audio and video applications. It elegantly combines a compact form factor with robust functionality, making it an essential tool for any AV system requiring signal distribution. This unit is built to handle high-resolution video signals with ease, ensuring that content reaches multiple outputs without degradation or loss in quality.

One of the standout features of the TP T BNC DA4 is its ability to support a wide range of signals including SDI, HD-SDI, and 3G-SDI. This versatility allows it to adapt seamlessly to various broadcast and production environments, ensuring compatibility with existing equipment. The unit boasts four identical BNC outputs, which can deliver pristine video signals to multiple displays or recording devices.

The TP T BNC DA4 employs advanced technologies to maintain signal integrity over longer distances. The unit features advanced signal processing, ensuring that even when distributing signals across significant lengths, there is minimal degradation. This is crucial in professional settings where maintaining signal fidelity is paramount.

Built with reliability in mind, the Extron TP T BNC DA4 is constructed from durable materials and designed for easy integration into various rack environments. Furthermore, its compact design ensures that it can be installed without taking up excessive space, which is an essential consideration in many professional settings.

Another important characteristic of the TP T BNC DA4 is its user-friendly interface. With straightforward controls and clear status indicators, operators can easily monitor signal quality and configuration. The device also offers options for adjusting sync settings and maintaining optimum performance.

Finally, the Extron TP T BNC DA4 is backed by the company’s commitment to quality and support, providing users with peace of mind and reliability. Extron's reputation for excellence in the AV industry makes the TP T BNC DA4 a trusted choice among professionals who require high-quality signal distribution solutions.

In summary, the Extron Electronics TP T BNC DA4 is a powerful and reliable distribution amplifier that meets the demands of modern AV systems with its advanced features, robust build quality, and commitment to signal integrity. It is an indispensable component for any professional setup that seeks to deliver high-quality audio and video signals to multiple outputs efficiently.