Extron electronic TP T BNC DA4, TP T 15HD AV, TP T 468 user manual Mounting the AAP devices

Page 16

Installation and Operation, cont’d

#4-40 Nut w/ Captive Washer

Wall Stud

Wall Box

Screws or Nails

Flush with Wall Surface

4-gang Wall Box

R

T 46

8

MONITO

 

 

TP

 

INPUT

 

 

Figure 2-9 — Attaching a wall box to a wall stud

8. Cable and install the desired AAPs, set the Composite/ RGB and DDSP DIP switches, and cable and test the transmitter before fastening the transmitter into the wall box. See Input cabling, later in this chapter, for details.

The AAPs, switches, and cable are inaccessible after installation.

Mounting the AAP devices

The TP T 468 faceplates accept up to four optional single height Extron Architectural Adapter Plates (AAPs). The adapter plates allow for a variety of connectors.

Blank plates (two single-space and one double-space plate) are included on the transmitter to cover unused spaces. Adapter plates must be ordered separately. They also must be attached to the faceplate and cabled before the interface is installed in the wall or furniture (figure 2-10). The screws needed for installing the adapter plates are built into the plates, so no additional screws are needed.

1.

Remove the blank plates from the interface by unscrewing

 

the nuts that fasten the plates to the faceplate.

2.

Insert the adapter plate screws through the holes in the

 

faceplate. Attach the adapter plates to the faceplate with

 

the provided captive washers and #4-40 nuts.

TP T 468

Figure 2-10 — Mounting an AAP

3.

Attach the output cables to the rear connectors of the

 

adapter plates. Soldering will be required for some

 

connectors. Attach foil and braided shields to ground

 

connections.

Mounting the transmitter to the mud ring or wall box

1.

Remove power from the interface by disconnecting the

 

power supply.

2.

Place the interface through the opening in the wall or

 

furniture and into the wall box. Take care not to damage

 

the cables, which fit behind the interface, at the back of the

 

wall box.

3.

Mount the interface’s faceplate to the mud ring or wall box

 

with machine screws (figure 2-11 on the next page).

2-16 Extron TP Transmitters • Installation and Operation

Extron TP Transmitters • Installation and Operation 2-17

Page 15 Page 17
Image 16
Page 15 Page 17
Contents TP Transmitters Family Precautions Extron’s WarrantyFCC Class a Notice Table of Contents Appendix a Specifications , Accessories, Table of Contents, cont’dTP Transmitters Introductionduction,cont’d About the TP Transmitters FeaturesTP T 15HD a transmitter Introduction, cont’d TP T 15HD AV transmitterTP T 468 transmitter TP T BNC DA4 transmitter/distribution amplifierTwo Instaltal lationandandOperation,cont’d Installation Extron TP Transmitters Installation and OperationOverview Video jumpersVideo DIP switch Installation and Operation, cont’dAudio jumpers Rack mounting procedure Mounting the TP T 15HD A, TP T 15HD AV, orTabletop use UL rack mounting guidelinesAttach the rack shelf to the rack using the supplied bolts Under-desk mountingTP T 468 Installation Overview Installing the TP TThrough-desk mounting Preparing the site and installing the mud ring or wall box UL guidelines for wall box installationEuro Channel models Grounding outer braided and foil shields Mounting the AAP devices Mounting the transmitter to the mud ring or wall boxInstalling the Euro Channel transmitter Grounding the transmitterInput cabling Computer video and PC audioComputer Input connector Connect a 16 Installation features, TP TComposite video and stereo audio Transmitted signal cablingRgbhv video Termination of TP cable Cable testingEqualizing pair skew Unique TP T 468 front panel features Front Panel Control and IndicatorsPower connector Troubleshooting If the image does not appearIf the image is not displayed correctly If the receiver’s Manual/Auto LED flashesAAppendix Video AudioAudio input GeneralSpecifications, Accessories, and Part Numbers, cont’d TP T 15HD AV TP T BNC DA4Accessories Included PartsCables and Adapters TP TRear connector type Front connector typeOptional Adapter Plates Adapter plate descriptionMulti Type Connector Architectural Adapter Plates TP T 468 4-gang Cut-out Template TP T 468 TemplateSpecifications, Accessories, and Part Numbers, cont’d
Related manuals
Manual 1 pages 13.51 Kb Manual 1 pages 31.54 Kb

TP T 468, TP T 15HD A, TP T 15HD AV, TP T BNC DA4 specifications

The Extron Electronics TP T BNC DA4 is a cutting-edge distribution amplifier designed for professional audio and video applications. It elegantly combines a compact form factor with robust functionality, making it an essential tool for any AV system requiring signal distribution. This unit is built to handle high-resolution video signals with ease, ensuring that content reaches multiple outputs without degradation or loss in quality.

One of the standout features of the TP T BNC DA4 is its ability to support a wide range of signals including SDI, HD-SDI, and 3G-SDI. This versatility allows it to adapt seamlessly to various broadcast and production environments, ensuring compatibility with existing equipment. The unit boasts four identical BNC outputs, which can deliver pristine video signals to multiple displays or recording devices.

The TP T BNC DA4 employs advanced technologies to maintain signal integrity over longer distances. The unit features advanced signal processing, ensuring that even when distributing signals across significant lengths, there is minimal degradation. This is crucial in professional settings where maintaining signal fidelity is paramount.

Built with reliability in mind, the Extron TP T BNC DA4 is constructed from durable materials and designed for easy integration into various rack environments. Furthermore, its compact design ensures that it can be installed without taking up excessive space, which is an essential consideration in many professional settings.

Another important characteristic of the TP T BNC DA4 is its user-friendly interface. With straightforward controls and clear status indicators, operators can easily monitor signal quality and configuration. The device also offers options for adjusting sync settings and maintaining optimum performance.

Finally, the Extron TP T BNC DA4 is backed by the company’s commitment to quality and support, providing users with peace of mind and reliability. Extron's reputation for excellence in the AV industry makes the TP T BNC DA4 a trusted choice among professionals who require high-quality signal distribution solutions.

In summary, the Extron Electronics TP T BNC DA4 is a powerful and reliable distribution amplifier that meets the demands of modern AV systems with its advanced features, robust build quality, and commitment to signal integrity. It is an indispensable component for any professional setup that seeks to deliver high-quality audio and video signals to multiple outputs efficiently.
Top Page Image Contents