Extron electronic TP T 15HD A UL guidelines for wall box installation, Euro Channel models

Page 14

Installation and Operation, cont’d

9Install the desired AAPs on the transmitter. See “Mounting the optional AAP devices,” later in this chapter.

10Mount the transmitter into the electrical box or to the mud ring. If using a wall box, see “Mounting the transmitter to the mud ring or wall box,” later in this chapter.

11Restore power to the devices.

UL guidelines for wall box installation

The following Underwriters Laboratories (UL) requirements pertain to the installation of the TP T 468 into a wall or furniture (figure 2-6).

Installation

Cable

Conduit

H. S

HIFT

 

 

 

 

 

 

 

MONITOR

 

T

46

8

 

MIN/MAX

 

 

TP

 

 

INPUT

 

 

 

 

 

 

 

 

R

 

 

MO

NITO

 

NO

 

 

OR

 

 

MO

NIT

 

 

 

 

 

 

 

 

 

 

 

AUDIO

2.5"

 

 

 

TP T 468

Figure 2-6 — TP T 468 in a four-gang wall box

1.This unit is not to be connected to a centralized DC power source or used beyond their rated voltage range.

2.This unit must be installed in UL listed junction boxes.

3.This unit must be installed with conduit in accordance with the National Electrical Code.

Euro Channel models

The TP T 468 is available in a Euro Channel (EC) version (see appendix A for part numbers).

The front and rear panel features, cabling requirements, and testing/troubleshooting procedures are identical to the descriptions shown in chapter 2, Installation and Operation, for the non-EC models. See Euro Channel transmitter installation in this appendix for the EC transmitter model installation instructions.

Preparing the site and installing the mud ring or wall box

The TP T 468 is mounted into a wall or furniture. Follow the instructions appropriate to the mounting option you have selected. Templates for optional faceplates are not included in this manual.

CAUTION

The transmitter must be installed into an

 

Underwriters Laboratories (UL) approved electrical

 

wall box.

Choose a location that allows cable runs without interference. Allow enough depth for both the wall box and the cables. You may need to install the cables into the wall, furniture, or conduits before installing the transmitter.

The installation must conform to national and local electrical codes and to the equipment’s size requirements. An actual-size cut-out template is provided in appendix A of this manual.

Installation using a UL listed wall box (available from Extron) is recommended for most mounting options, but the included mud rings can be used instead. All wall boxes must be at least 2.5" (6.4 cm) deep.

Before using the mud rings, verify that the installation conforms to national and local electrical codes.

1.Select and cut out the appropriate template for your installation type:

•If you are using a mud ring, use the template provided with the mud ring. Cut out the indicated center portion.

•If you are using a wall box, cut out or make a 100% size photocopy of the template in appendix A that corresponds to the faceplate you are using, and cut out the center portion as indicated on the template.

2.

Place the template (or the wall box or mud ring) against

 

the installation surface, and mark the guidelines for the

 

opening on the wall or furniture.

3.

Cut out the wall or furniture material from the marked

 

area.

4.

Check the opening size by inserting the wall box, mud

 

ring, or transmitter into the opening. The box or mud ring

 

(if used) and/or transmitter should fit easily into the

 

opening. Enlarge or smooth the edges of the opening if

 

needed.

2-12 Extron TP Transmitters • Installation and Operation

Extron TP Transmitters • Installation and Operation 2-13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents TP Transmitters Family Precautions Extron’s WarrantyFCC Class a Notice Table of Contents TP Transmitters Table of Contents, cont’dAppendix a Specifications , Accessories, TP T 15HD a transmitter FeaturesIntroductionduction,cont’d About the TP Transmitters TP T 468 transmitter Introduction, cont’dTP T 15HD AV transmitter TP T BNC DA4 transmitter/distribution amplifierTwo Overview Instaltal lationandandOperation,cont’d InstallationExtron TP Transmitters Installation and Operation Video jumpersAudio jumpers Installation and Operation, cont’dVideo DIP switch Tabletop use Rack mounting procedureMounting the TP T 15HD A, TP T 15HD AV, or UL rack mounting guidelinesAttach the rack shelf to the rack using the supplied bolts Under-desk mountingThrough-desk mounting Installing the TP TTP T 468 Installation Overview Euro Channel models UL guidelines for wall box installationPreparing the site and installing the mud ring or wall box Grounding outer braided and foil shields Mounting the AAP devices Mounting the transmitter to the mud ring or wall boxInstalling the Euro Channel transmitter Grounding the transmitterInput cabling Computer video and PC audioComputer Input connector Connect a 16 Installation features, TP TRgbhv video Transmitted signal cablingComposite video and stereo audio Equalizing pair skew Cable testingTermination of TP cable Power connector Front Panel Control and IndicatorsUnique TP T 468 front panel features If the image is not displayed correctly TroubleshootingIf the image does not appear If the receiver’s Manual/Auto LED flashesAAppendix Audio input VideoAudio GeneralSpecifications, Accessories, and Part Numbers, cont’d TP T 15HD AV TP T BNC DA4Cables and Adapters AccessoriesIncluded Parts TP TOptional Adapter Plates Rear connector typeFront connector type Adapter plate descriptionMulti Type Connector Architectural Adapter Plates TP T 468 4-gang Cut-out Template TP T 468 TemplateSpecifications, Accessories, and Part Numbers, cont’d
Related manuals
Manual 1 pages 13.51 Kb Manual 1 pages 31.54 Kb

TP T 468, TP T 15HD A, TP T 15HD AV, TP T BNC DA4 specifications

The Extron Electronics TP T BNC DA4 is a cutting-edge distribution amplifier designed for professional audio and video applications. It elegantly combines a compact form factor with robust functionality, making it an essential tool for any AV system requiring signal distribution. This unit is built to handle high-resolution video signals with ease, ensuring that content reaches multiple outputs without degradation or loss in quality.

One of the standout features of the TP T BNC DA4 is its ability to support a wide range of signals including SDI, HD-SDI, and 3G-SDI. This versatility allows it to adapt seamlessly to various broadcast and production environments, ensuring compatibility with existing equipment. The unit boasts four identical BNC outputs, which can deliver pristine video signals to multiple displays or recording devices.

The TP T BNC DA4 employs advanced technologies to maintain signal integrity over longer distances. The unit features advanced signal processing, ensuring that even when distributing signals across significant lengths, there is minimal degradation. This is crucial in professional settings where maintaining signal fidelity is paramount.

Built with reliability in mind, the Extron TP T BNC DA4 is constructed from durable materials and designed for easy integration into various rack environments. Furthermore, its compact design ensures that it can be installed without taking up excessive space, which is an essential consideration in many professional settings.

Another important characteristic of the TP T BNC DA4 is its user-friendly interface. With straightforward controls and clear status indicators, operators can easily monitor signal quality and configuration. The device also offers options for adjusting sync settings and maintaining optimum performance.

Finally, the Extron TP T BNC DA4 is backed by the company’s commitment to quality and support, providing users with peace of mind and reliability. Extron's reputation for excellence in the AV industry makes the TP T BNC DA4 a trusted choice among professionals who require high-quality signal distribution solutions.

In summary, the Extron Electronics TP T BNC DA4 is a powerful and reliable distribution amplifier that meets the demands of modern AV systems with its advanced features, robust build quality, and commitment to signal integrity. It is an indispensable component for any professional setup that seeks to deliver high-quality audio and video signals to multiple outputs efficiently.
Top Page Image Contents