COMPONENT ACCESS
This section provides procedures for testing and replacing various major components used in this brewer should service become necessary. Refer to Troubleshooting for assistance in determining the cause of any problem.
WARNING - Inspection, testing, and repair of electri- cal equipment should be performed only by qualified service personnel. The brewer should be unplugged when servicing, except when electrical tests are re- quired and the test procedure specifically states to plug in the brewer.
WARNING - Disconnect the brewer from the power source before the removal of any panel or the replace- ment of any component.
All components are accessible by the removal of the top cover, front access panel (ICB), or rear access panel (ITCB & ITB).
Refer to wiring diagrams at the back of this manual when reconnecting wires.
FIG. 10-1 ICB COMPONENT ACCESS
FIG. 10-2 ITB/ITCB COMPONENT ACCESS
FIG. 10-3 ICB TWIN COMPONENT ACCESS
10 | 42461 0911809 |
|